0

Full Content is available to subscribers

Subscribe/Learn More  >

Mechanical Properties Anisotropy in X80 Line Pipes

[+] Author Affiliations
Alexey Gervasyev, Roumen Petrov

Ghent University, Ghent, Belgium

Igor Pyshmintsev, Alexey Struin

Russian Research Institute for the Tube and Pipe Industries (RosNITI), Chelyabinsk, Russia

Brian Leis

B N Leis Consultant, Inc., Worthington, OH

Paper No. IPC2016-64695, pp. V003T05A038; 7 pages
doi:10.1115/IPC2016-64695
From:
  • 2016 11th International Pipeline Conference
  • Volume 3: Operations, Monitoring and Maintenance; Materials and Joining
  • Calgary, Alberta, Canada, September 26–30, 2016
  • Conference Sponsors: Pipeline Division
  • ISBN: 978-0-7918-5027-5
  • Copyright © 2016 by ASME

abstract

The anisotropy of tensile properties and impact toughness of X80 ferrite-bainite pipeline steels was investigated. The lowest strength values were found in longitudinal (L) direction, medium — in the direction of wall thickness (Z-direction), the highest — in transverse (T) direction. The anisotropy of the tensile properties is low and does not change significantly with the test temperature. The maximum variation in yield stress and tensile stress do not exceed the ranges of 100 MPa and 50 MPa respectively.

The anisotropy in toughness is more clearly pronounced. Impact toughness in both T and L directions is more than 250 J/cm2 at minus 20°C while in Z-direction it is less than 30 J/cm2 at the same temperature. Low Z-direction toughness determines the susceptibility of steel to splitting during ductile fracture propagation (formation of brittle cracks parallel to the rolling plane of the plate). Microstructure and crystallographic texture analyses showed that the susceptibility to splitting is controlled by a number of factors like the predominant orientation of cleavage crystallographic planes parallel to the rolling plane, morphology of the microstructure elements, and the distribution of “second” phases.

Copyright © 2016 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In