0

Full Content is available to subscribers

Subscribe/Learn More  >

Design Considerations for Tip Clearance Control and Measurement on a Turbine Rainbow Rotor With Multiple Blade Tip Geometries

[+] Author Affiliations
S. Lavagnoli, C. De Maesschalck, V. Andreoli

von Karman Institute for Fluid Dynamics, Rhode Saint Genèse, Belgium

Paper No. GT2016-56544, pp. V006T05A011; 13 pages
doi:10.1115/GT2016-56544
From:
  • ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition
  • Volume 6: Ceramics; Controls, Diagnostics and Instrumentation; Education; Manufacturing Materials and Metallurgy
  • Seoul, South Korea, June 13–17, 2016
  • Conference Sponsors: International Gas Turbine Institute
  • ISBN: 978-0-7918-4982-8
  • Copyright © 2016 by ASME

abstract

The accurate design, control and monitoring of the running gaps between static and moving components is vital to preserve the mechanical integrity and ensure the correct functioning of any compact rotating machinery. Throughout engine service, the rotor tip clearance undergoes large variations due to installation tolerances or as the result of different thermal expansion rates of the blades, rotor disk and casing during speed transients. Hence, active tip clearance control concepts and engine health monitoring systems rely on precise real-time gap measurements. Moreover, this tip gap information is crucial for engine development programs to verify the mechanical and aerothermal design, and validate numerical predictions.

This paper presents an overview of the critical design requirements for testing engine-representative blade tip flows in a rotating turbine facility. The manuscript specifically focuses on the challenges related with the design, verification and monitoring of the running tip clearance during a turbine experiment.

In the large-scale turbine facility of the von Karman Institute, a rainbow rotor was mounted for simultaneous aerothermal testing of multiple blade tip geometries. The tip shapes are a selection of high-performance squealer-like and contoured blade tip designs. On the rotor disc, the blades are arranged in seven sectors operating at different clearance levels from 0.5 up to 1.5% of the blade span.

Prior to manufacturing, the blade geometry was modified to compensate for the radial deformation of the rotating assembly under centrifugal loads. A numerical procedure was implemented to minimize the residual unbalance of the rotor in rainbow configuration, and to optimize the placement of every single airfoil within each sector. Subsequently, the rotor was balanced in-situ to reduce the vibrations and satisfy the international standards for high balance quality. The single-blade tip clearance in rotation was measured by three fast-response capacitive probes located at three distinct circumferential locations around the rotor annulus. Additionally, the minimum running blade clearance is captured with wear gauges located at five axial positions along the blades chord. The capacitance probes are self-calibrated using a multi-test strategy at several rotational speeds. The in-situ calibration methodology and dedicated data reduction techniques allow the accurate measurement of the distance between the turbine casing and the local blade tip features (rims and cavities) for each rotating airfoil separately. General guidelines are given for the design and calibration of a tip clearance measurement system that meets the required measurement accuracy and resolution in function of the sensor uncertainty, nominal tip clearance levels and tip seal geometry.

Copyright © 2016 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In