0

Full Content is available to subscribers

Subscribe/Learn More  >

Design and Evaluation of MEMS-Based Stirling Cycle Micro-Refrigeration System

[+] Author Affiliations
Dongzhi Guo, Jingsheng Gao, Alan J. H. McGaughey, Suresh Santhanam, Gary K. Fedder, Shi-Chune Yao

Carnegie Mellon University, Pittsburgh, PA

Matthew Moran

Isotherm Technologies LLC, Medina, OH

Bill Anderson

Advanced Cooling Technologies, Lancaster, PA

Paper No. IMECE2011-63084, pp. 83-90; 8 pages
doi:10.1115/IMECE2011-63084
From:
  • ASME 2011 International Mechanical Engineering Congress and Exposition
  • Volume 4: Energy Systems Analysis, Thermodynamics and Sustainability; Combustion Science and Engineering; Nanoengineering for Energy, Parts A and B
  • Denver, Colorado, USA, November 11–17, 2011
  • Conference Sponsors: ASME
  • ISBN: 978-0-7918-5490-7
  • Copyright © 2011 by ASME

abstract

A Stirling cycle micro-refrigeration system composed of arrays of silicon MEMS cooling elements has been designed and evaluated thermodynamically. The cooling elements are each 5 mm-long, 2.25 mm-wide, have a thickness of 300 μm, and are fabricated in a stacked array on a silicon wafer. A 0.5 mm-long regenerator is placed between the compression (hot side) and expansion (cold side) diaphragms. The diaphragms are 2.25 mm circles driven electrostatically. Helium is the working fluid, pressurized at 2 bar and sealed in the system. Under operating conditions, the hot and cold diaphragms oscillate sinusoidally 90° out of phase such that heat is extracted to the expansion space and released from the compression space. The bulk silicon substrate on which the device is grown is etched with “zipping” shaped chambers under the diaphragms. The silicon enables efficient heat transfer between the gas and heat source/sink as well as reduces the dead volume of the system, thus enhancing the cooling capacity. In addition, the “zipping” shaped substrates reduce the voltage required to actuate the diaphragms. An array of vertical silicon pillars in the regenerator serves as a thermal capacitor transferring heat to and from the working gas during a cycle. In operation, the push-pull motion of the diaphragm makes a 300 μm stroke and actuates at a frequency of 2 kHz. Parametric study of the design shows the effects of phase lag, swept volume ratio between the hot space and cold space, and dead volume ratio on cooling capacity. At TH = 313.15 K and TC = 288.15 K and assuming a perfect regenerator, the thermodynamic optimization analysis gives a heat extraction rate of 0.22 W per element and cooling capacity of 30 W/cm2 for the stacked system. Evaluation of the stacked system shows that the COP will reach 6.3 if the expansion work from the cold side is recovered electrostatically and used to drive the hot side diaphragm.

Copyright © 2011 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In