0

Full Content is available to subscribers

Subscribe/Learn More  >

Two-Dimensional FEM Stress Analysis of Adhesive Butt Joints Filled With Nano-Composite in Adhesive Subjected to Static Tensile Loading

[+] Author Affiliations
Toshiyuki Sawa, Shougo Tanabe, Kazunari Kotajima, Yasuhisa Sekiguchi

Hiroshima University, Higashihiroshima, Hiroshima, Japan

Takashi Kobayashi

Numazu National College of Technology, Numazu, Japan

Paper No. IMECE2011-63038, pp. 449-455; 7 pages
doi:10.1115/IMECE2011-63038
From:
  • ASME 2011 International Mechanical Engineering Congress and Exposition
  • Volume 3: Design and Manufacturing
  • Denver, Colorado, USA, November 11–17, 2011
  • Conference Sponsors: ASME
  • ISBN: 978-0-7918-5489-1
  • Copyright © 2011 by ASME

abstract

The interface stress distributions and the stress distributions around fillers in adhesive butt joints including fillers under static tensile loading are analyzed using Finite Element Method (FEM). The effects of stiffness, size and filling rate of fillers on the interfaces stress distributions and the stress distribution around the fillers are examined in the FEM calculations. It is seen that the maximum value of the stress around the edge of the adhesive interface decreases as the filling rate increases, while the stress around the fillers increases. The result shows that the joint strength increases more than that of the joints without fillers when the filling rate is lower (around 10 weight %). In addition, it is observed that the joint strength decreases at high filling rate. For verification of the FEM calculations, experiments were carried out to measure the joint strength. The analytical results are in a fairly good agreement with the experimental results.

Copyright © 2011 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In