0

Full Content is available to subscribers

Subscribe/Learn More  >

Numerical Analysis of Biogas Composition Effects on Combustion Parameters and Emissions in Biogas Fueled HCCI Engines for Power Generation

[+] Author Affiliations
Iván D. Bedoya, Francisco J. Cadavid

University of Antioquia, Medellín, Colombia

Samveg Saxena, Robert W. Dibble

University of California at Berkeley, Berkeley, CA

Paper No. ICEF2011-60120, pp. 423-440; 18 pages
doi:10.1115/ICEF2011-60120
From:
  • ASME 2011 Internal Combustion Engine Division Fall Technical Conference
  • ASME 2011 Internal Combustion Engine Division Fall Technical Conference
  • Morgantown, West Virginia, USA, October 2–5, 2011
  • ISBN: 978-0-7918-4442-7
  • Copyright © 2011 by ASME

abstract

This study investigates the effects of biogas composition on combustion stability for a purely biogas fueled HCCI engine. Biogas is one of the most promising renewable fuels for Combined Heat and Power systems driven by internal combustion engines. However, the high content of CO2 in biogas composition leads to low thermal efficiencies in spark ignited and dual fuel compression ignited engines. The study is divided into two parts: first experimental results on a biogas-fueled HCCI engine are used to validate a numerical model, and second the model is used to investigate how biogas composition impacts combustion stability. In the first part of the study, experimental analysis of a 4 cylinder, 1.9 L Volkswagen TDI Diesel engine running with biogas in HCCI mode has shown high gross indicated mean effective pressure (close to 8 bar), high gross indicated efficiency (close to 45%) and ultra-low NOx emissions below the US2010 limit (0.27 g/kWh). An inlet absolute pressure of 2 bar and inlet temperature of 473 K (200°C) were required for allowing HCCI combustion with a biogas composition of 60% CH4 and 40% CO2 on a volumetric basis. However, slight changes in inlet pressure and temperature caused large changes in cycle-to-cycle variations at low equivalence ratios and large changes in ringing intensity at high equivalence ratios. A numerical model is validated against these experimental results. In the second part of the study, the numerical results for varied biogas composition show that at high load limit, higher contents of CH4 in biogas composition allow advanced combustion and increased burning rates of the biogas air mixture. Higher contents of CO2 in biogas composition allow lowered ringing intensities with moderate decrease in the indicated efficiency and power output. NOx emissions are not highly affected by biogas composition, while CO and HC emissions tend to increase with higher contents of CO2 . According with the numerical results, biogas composition is an effective strategy to control the onset of combustion and combustion phasing of HCCI engines running biogas, allowing more stabilized combustion at low equivalence ratios and safe operation at high equivalence ratios. The main advantages of using biogas fueled HCCI engines in CHP systems are the low sensitivity of power output and indicated efficiency to biogas composition, as well as the ultra low NOx emissions achieved for all tested compositions.

Copyright © 2011 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In