0

Full Content is available to subscribers

Subscribe/Learn More  >

Visual and Thermal Studies of Single Tube Reflood Under Typical PWR LB-LOCA Conditions

[+] Author Affiliations
Yiyun Jessy Zeng, Colin P. Hale, Simon P. Walker, Geoffrey F. Hewitt

Imperial College London, London, UK

Paper No. ICONE18-29449, pp. 471-480; 10 pages
doi:10.1115/ICONE18-29449
From:
  • 18th International Conference on Nuclear Engineering
  • 18th International Conference on Nuclear Engineering: Volume 4, Parts A and B
  • Xi’an, China, May 17–21, 2010
  • Conference Sponsors: Nuclear Engineering Division
  • ISBN: 978-0-7918-4932-3
  • Copyright © 2010 by ASME

abstract

The common approach to safety in a nuclear power plant is to design the system to respond safely to a large postulated accident, the so-called design basis accident. Accidents more severe than the design basis accident (“severe accidents”) are assessed but the system is not designed to withstand them; they are considered too unlikely to require specific design actions. For the pressurised-water reactor (PWR), the design basis accident (DBA) is the Large Break Loss-of-Coolant Accident (LB-LOCA), in which it is assumed that one of the large inlet coolant pipes from the circulating pump to the reactor vessel is completely broken and moves apart to allow free discharge of the primary coolant from both broken ends. For this type of break total coolant loss will occur in 100s or less. Although the reactor is by this time sub-critical so that little power is produced from fission, a large amount of decay power exists and causes the fuel rod claddings to have a temperature in the region of 600–800 °C. This paper describes experimental investigations designed and performed in order to provide detailed information about the macroscopic behaviour of the steam-water flow occurring during the reflood phase following a PWR LB-LOCA. Specifically, a bottom-up rewetting process was studied, in which water droplets may be entrained in the vapour flow and contribute to cooling of the hot fuel pin before it is quenched. In these experiments the test section is initially preheated to temperatures up to 600 °C and then quenched by introducing water at the bottom of the tube at atmospheric pressure. During the course of this transient process axial temperature and heat flux profiles will be recorded, extending the existing databank of cases for code validation. Simultaneously, an axial viewing technique will be applied to observe the quench front, and any pre-cursory droplet production, occurring during these singletube reflood experiments. As part of the preliminary validation of this novel technique, a series of air-water vertical upflow conditions have been examined. The results of these preliminary studies provide detailed visualisation of typical entrainment processes likely to be encountered during single-tube reflood.

Copyright © 2010 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In