0

Full Content is available to subscribers

Subscribe/Learn More  >

Analytical Determination of Stress Indices and Stress Intensification Factor for an Extruded Nozzle of Super Pipe

[+] Author Affiliations
Lv Feng, Zhou Gengyu

Suzhou Nuclear Power Research Institute, Suzhou, China

Qian Haiyang

GE Power, Windsor, CT

Paper No. PVP2018-85144, pp. V06BT06A024; 5 pages
doi:10.1115/PVP2018-85144
From:
  • ASME 2018 Pressure Vessels and Piping Conference
  • Volume 6B: Materials and Fabrication
  • Prague, Czech Republic, July 15–20, 2018
  • Conference Sponsors: Pressure Vessels and Piping Division
  • ISBN: 978-0-7918-5168-5
  • Copyright © 2018 by ASME

abstract

The super pipe nozzles in nuclear power plants are usually designed to be in compliance with the requirements of Class 2 piping of Section III of the ASME Boiler and Pressure Vessel Code. The stress indices B2 and stress intensification factor i are required for the stress evaluation. In the past two decades, the hot extrusion forming technology has been widely used to manufacture those nozzles, instead of traditional insert weldolets. However, previous extruded nozzle stress analyses have shown B2 that the calculated stresses may exceed the limits in some working conditions. The objective of present study is to determine the stress indices and stress intensification factor for an extruded nozzle of the supper pipe by the finite element method and to evaluate the conservatism of those factors from the ASME Code formulae. In this paper, a three-dimensional finite element model of an extruded nozzle is developed. Four load cases are considered, which are corresponding to an in-plane bending moment and an out-plane bending moment applied at the run pipe side and at the branch pipe side, respectively. The magnitude of bending moment is assumed to be 1000Nm. The stress indices B2r, B2b, C2r, C2b, K2r and K2b, where the subscript r and b refer to the run pipe and B2r the branch pipe, are calculated based on the finite element analysis results. The stress intensification factor ir and ib are determined by the empirical formula: ir = C2r*K2r/2 and ib = C2b*K2b/2. Further, the developed factors are compared with those calculated from the ASME code formulae. It is found that the stress indices B2r and B2b obtained from the linear elastic finite element analysis are conservative. Currently, the values of B2r and B2b gained from the ASME code formulae are more appropriate for the stress evolution. The stress intensification factors ir and ib obtained from the analytical determination are lower than those calculated from the ASME code formula. For the extrude nozzle studied, the factor ir decreases 30% and the factor ib decreases about 3.3%.

Copyright © 2018 by ASME
Topics: Stress , Nozzles , Pipes

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In