0

Full Content is available to subscribers

Subscribe/Learn More  >

Development of Evaluation Method for Thermal Stratification by Cavity Flow in a Vertical Branch Pipe With Elbow and Horizontal Section: Experimental Results

[+] Author Affiliations
Atsushi Kodama, Yoshiteru Komuro, Keiichi Hori, Hironori Noguchi, Yoshiyuki Kondo, Koichi Tanimoto

Mitsubishi Heavy Industries, Ltd., Takasago, Japan

Paper No. ICONE26-81143, pp. V06AT08A014; 6 pages
doi:10.1115/ICONE26-81143
From:
  • 2018 26th International Conference on Nuclear Engineering
  • Volume 6A: Thermal-Hydraulics and Safety Analyses
  • London, England, July 22–26, 2018
  • Conference Sponsors: Nuclear Engineering Division
  • ISBN: 978-0-7918-5148-7
  • Copyright © 2018 by ASME

abstract

In nuclear plant piping, when high-temperature water penetrates from main pipe, a thermal stratification may be formed in a branch pipe with a closed end. The penetrating flow of high-temperature water is called as a cavity flow. If a thermal stratification interface is formed in an elbow of vertical-horizontal branch pipes, thermal fatigue may occur due to periodic temperature fluctuations. Because high cycle thermal fatigue may have significant influence on structure integrity of pipe, it is important to evaluate the position which is called penetration depth of a cavity flow in which a thermal stratification interface is formed. In the present evaluation guideline which was formulated by the Japan Society of Mechanical Engineers, applicable range is limited only to 50 mm diameter of vertical-horizontal branch pipe. Therefore, it needs to expand the applicable diameter range of vertical-horizontal branch pipe.

In this research, 200 mm diameter piping test is conducted to confirm characteristic phenomena, and to build evaluation method of penetration depth in large diameter piping.

This paper presents experimental results and consideration of thermal hydraulics phenomena about thermal stratification. The horizontal piping test and the vertical-horizontal branch piping test are conducted. Pipes are made of acrylic resin for visualization of water flow. The water temperature is less than 60°C. The horizontal piping test reproduces natural circulation flow by installing a heater which imitated heating from cavity flow, and a chiller which imitated heat dissipation from a blockage valve. Temperature profiles are obtained by using thermocouples and optical fibers. Moreover, water flow in piping is visualized by injected ink. From the visualization and the temperature measuring result in the horizontal piping test, flow characteristic of the natural circulation region of large diameter piping is clarified The vertical-horizontal branch piping test reproduces cavity flow penetration from main pipe. Temperature profiles are obtained at cross-section direction and axial direction. Moreover, the amount of mass transfer at the thermal stratification which is formed between a cavity flow and natural circulation is evaluated experimentally by using a lithium tracer method. The second paper[Ref.2] explains modeling of evaluation method for cavity flow penetration depth in large diameter piping.

Copyright © 2018 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In