0

Full Content is available to subscribers

Subscribe/Learn More  >

Large-Eddy Simulation of Corner Separation in a Compressor Cascade

[+] Author Affiliations
Byung-Young Min, Jongwook Joo, Jomar Mendoza, Jin Lee, Guoping Xia, Gorazd Medic

United Technologies Corporation, East Hartford, CT

Paper No. GT2018-77144, pp. V02CT42A052; 12 pages
doi:10.1115/GT2018-77144
From:
  • ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition
  • Volume 2C: Turbomachinery
  • Oslo, Norway, June 11–15, 2018
  • Conference Sponsors: International Gas Turbine Institute
  • ISBN: 978-0-7918-5101-2
  • Copyright © 2018 by United Technologies Corporation

abstract

In this paper, wall-resolved LES computations for a compressor cascade from Ecole Centrale de Lyon [1] are presented. A computational grid containing about 600 million computational cells was used in these simulations. This grid resolves the details of tripping strips used in the experiments, located near the leading edge of the blade on both suction and pressure sides. Endwall turbulent boundary layer at cascade inlet was measured to be at a momentum thickness based Reynolds number of about 7000 to 8000, with quite a bit of variation in the pitchwise direction. In order to avoid the cost of simulating the entire duct upstream of the cascade, and any auxiliary flat plate boundary layer simulations, the inlet fluctuations for LES computations were generated using digital filtering method for synthetic turbulence generation [27]. Turbulence statistics from a database of high fidelity eddy simulations of flat plate boundary layers (at similar Reynolds numbers) from KTH Royal Institute of Technology in Stockholm [28] were used to fully define the properties of the cascade inlet boundary layer.

In this paper, time-averaged results from three LES computations for this configuration are presented — one with no inlet fluctuations at the cascade endwall at the domain inlet, and then two computations with inlet fluctuations and boundary layers at Reθ of 7000 and 8183. These provide a sensitivity of LES predictions of corner separation in the cascade to the boundary layer thickness at cascade inlet.

A comparison of these simulations with prior DDES (and RANS) simulations from UTRC [26], as well as existing LES results from Ecole Centrale de Lyon [12], allows to further the understanding of critical elements of the endwall flow physics. More specifically, it provides more insight into which phenomena need to be sufficiently resolved (e.g. horseshoe vortex) in order to capture both the average behavior of the corner separation, as well as its unsteady dynamics. In addition, it provides new information which will help define best practice guidelines for the use of eddy simulations to resolve endwall features in compressors at off-design conditions.

Copyright © 2018 by United Technologies Corporation

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In