0

Techniques for Simulating Creep Damage Evolution at Welds With Emphasis on Evaluating Longitudinal Seam Peaking in High-Temperature Piping Systems PUBLIC ACCESS

[+] Author Affiliations
Phillip E. Prueter

Equity Engineering Group, Inc., Shaker Heights, OH

Paper No. ETAM2018-6710, pp. V001T04A001; 15 pages
doi:10.1115/ETAM2018-6710
From:
  • ASME 2018 Symposium on Elevated Temperature Application of Materials for Fossil, Nuclear, and Petrochemical Industries
  • ASME 2018 Symposium on Elevated Temperature Application of Materials for Fossil, Nuclear, and Petrochemical Industries
  • Seattle, Washington, USA, April 3–5, 2018
  • Conference Sponsors: ASME Standards and Certification
  • ISBN: 978-0-7918-4076-4
  • Copyright © 2018 by ASME

abstract

Realistically simulating the creep response of welded components can help quantify the risk associated with operating inservice, high-temperature equipment and can validate new component designs in the power generation and petrochemical industries. Detailed finite element analysis (FEA) is employed in this study and is coupled with generalized, non-linear creep simulation techniques to investigate the elevated temperature response of welds. Depending on original heat treatment, creep damage progression is known to be accelerated by the mismatch in properties of the base metal, weld deposit, and heat affected zone (HAZ). This mismatch results in stress intensification that can accelerate creep damage near a weldment (typically in or adjacent to the HAZ). In this paper, the effect of implementing an elastic damage parameter that adjusts the stiffness of the material as a function of creep damage is examined. This type of damage mechanics model has a significant impact on the predicted damage evolution near weld deposits and can realistically mimic observed in-service failures. Additionally, commentary on different creep damage failure criteria is provided. The simulations presented utilize the Materials Properties Council (MPC) Omega creep methodology, with particular emphasis on the behavior of high-temperature, low chrome (1-1/4 Cr 1/2 Mo) piping with longitudinal weld seam peaking.

Application of these techniques to high-temperature, low chrome piping is relevant as there have been numerous related catastrophic failures in the power generation and petrochemical industries attributed to weld seam peaking. Commonly, weld peaking occurs during fabrication due to angular misalignment of rolled plate. Furthermore, for many fusion-welded piping fabrication standards, no tolerance for peaking is specified. Local peaking can induce significant local bending stresses, and for components that operate in the creep regime, the presence of peaking can lead to an increased risk for creep crack initiation, propagation, and eventual rupture. An overview of some well-known historical low chrome piping failures is provided in this paper, and a literature review on existing creep analysis and peaking measurement methodologies is offered. Additionally, the remaining life of low chrome piping systems is estimated and the sensitivity in results to variations in key parameters is highlighted; these parameters include operating temperature, magnitude of peaking, and the effect of heat treatment. The simulation techniques discussed in this paper are not only valuable in estimating remaining life of in-service components, but detailed analysis can help establish recommended weld seam peaking fabrication tolerances, appropriate manufacturing practices, and practical inspection intervals for high-temperature piping systems.

Copyright © 2018 by ASME
This article is only available in the PDF format.

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In