0

Full Content is available to subscribers

Subscribe/Learn More  >

Pool Boiling Heat Transfer of Water on Copper Surfaces With Nanoparticles Coating

[+] Author Affiliations
Zhen Cao, Calle Preger, Zan Wu, Sahar Abbood, Maria E. Messing, Knut Deppert, Bengt Sunden

Lund University, Lund, Sweden

Paper No. IMECE2017-71303, pp. V008T10A065; 8 pages
doi:10.1115/IMECE2017-71303
From:
  • ASME 2017 International Mechanical Engineering Congress and Exposition
  • Volume 8: Heat Transfer and Thermal Engineering
  • Tampa, Florida, USA, November 3–9, 2017
  • Conference Sponsors: ASME
  • ISBN: 978-0-7918-5843-1
  • Copyright © 2017 by ASME

abstract

Saturated pool boiling heat transfer is investigated experimentally on a copper substrate with copper nanoparticle coatings at atmospheric pressure, in terms of critical heat flux (CHF) and heat transfer coefficient (HTC). Experiments are carried out on the substrate surface with a diameter of 12 mm using DI water as the working fluid. The coating is formed by stacking copper nanoparticles generated by an aerosol method. The aerosol nanoparticles are generated by a spark discharge generator with nitrogen gas as carrier gas and size-selected prior to electrostatic deposition. The thickness of the coating is quantified by the deposition time. In the present study, copper particles with diameter 35± 5 nm are selected, considering better coverage on the surface, while the deposition time is controlled as 4h and 8h, respectively.

The boiling curves and heat transfer coefficient of MS-1 (4h deposition) and MS-2 (8h deposition) were compared with the BS (bare surface). The results show that CHFs of MS-1 and MS-2 are increased by 24% and 36%, respectively compared with the BS, while heat transfer is enhanced as well. High speed visualization tells that the coating provides more active nucleate sites and the hydrophobicity of the coating helps bubbles departure from the surface at low and moderate heat flux. At high heat flux, a hollow well occurs on MSs to supply liquid effectively to avoid dryout. Therefore, CHF and heat transfer are both improved.

Copyright © 2017 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In