0

Full Content is available to subscribers

Subscribe/Learn More  >

Fabrication of Friction Stir Processed 6082-T6 Aluminum Alloy With Reinforced Powder

[+] Author Affiliations
Kazeem O. Sanusi, Esther T. Akinlabi

University of Johannesburg, Johannesburg, South Africa

Paper No. IMECE2017-71305, pp. V002T02A065; 5 pages
doi:10.1115/IMECE2017-71305
From:
  • ASME 2017 International Mechanical Engineering Congress and Exposition
  • Volume 2: Advanced Manufacturing
  • Tampa, Florida, USA, November 3–9, 2017
  • Conference Sponsors: ASME
  • ISBN: 978-0-7918-5835-6
  • Copyright © 2017 by ASME

abstract

In this study, Friction Stir Processing (FSP) technique was applied for the development of surface composites of 6082-T6 aluminum alloy reinforced with Titanium Carbide with the aim of investigating the possibility of enhancing the surface property of aluminium alloy by reinforcing it with Titanium Carbide to form metal matrix composites using one pass and three passes respectively. The groove with depth of 1.5 mm and width range from 0.5mm to 1.9mm were machined and filled with reinforcement powder using axial load of 20 kN. The rotational speed of the tools employed is 1000 rpm and the feed rate of 60 mm/min was used. The hardness properties to provide a sense of mechanical response and the surface morphology of the eroded samples were studied and characterised to reveal the microstructural features by using Scanning Electron Microscopy (SEM). Energy dispersive x-ray spectroscopy (EDS) was used to analyse the specimens. This study would motivate future studies to further explore the viability of composites produced using FSP technique.

Copyright © 2017 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In