0

Full Content is available to subscribers

Subscribe/Learn More  >

Comparison of Methods for Measuring Pump Flow Ripple and Impedance

[+] Author Affiliations
Chris Bramley

Babcock International, Bristol, UK

Nigel Johnston

University of Bath, Bath, UK

Paper No. FPMC2017-4223, pp. V001T01A008; 11 pages
doi:10.1115/FPMC2017-4223
From:
  • ASME/BATH 2017 Symposium on Fluid Power and Motion Control
  • ASME/BATH 2017 Symposium on Fluid Power and Motion Control
  • Sarasota, Forida, USA, October 16–19, 2017
  • Conference Sponsors: Fluid Power Systems and Technology Division
  • ISBN: 978-0-7918-5833-2
  • Copyright © 2017 by ASME

abstract

Positive displacement pumps produce flow and pressure ripple due to their pumping mechanism. Two ISO standard methods for measuring pump ripple were compared in terms of accuracy, sensitivity, reliability and practical difficulty. These were the “secondary source” (SS) method (ISO 10767-1: 1996) and the “2 pressures / 2 systems” (2P2S) method (ISO 10767-1: 2015). The 2P2S method has recently replaced the secondary source as the ISO standard for precision testing although the UK has retained the SS method for its BS ISO standard.

The methods produced similar source impedance and flow ripple results. The SS method enabled a wider range of operating conditions to be tested due to the more flexible circuit arrangement but the impedance results were affected by interference between the test pump and secondary source at the pumping harmonic frequencies. It was found that the simpler 2P2S circuit allowed measurements to be taken faster, but measurements were only valid at the pumping harmonic frequencies. Both methods were found to produce repeatable results provided there was no trapped air in the circuit.

Overall, the SS method was considered the stronger technique in terms of repeatability, accuracy, sensitivity and practicality, but it had a more complex data processing and experimental set up. It had more flexibility, which enabled the pump to be tested over the widest range of operating conditions, and the fluid borne noise characteristics of the test pump could be evaluated completely. The authors consider that the 2P2S method could be improved by the inclusion of a third transducer, and that it would be beneficial to retain the SS method as an alternative Standard.

Copyright © 2017 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In