0

Full Content is available to subscribers

Subscribe/Learn More  >

Crashworthiness Study of Helicopter Skid Landing Gear System Equipped With a Magnetorheological Energy Absorber

[+] Author Affiliations
Muftah Saleh, Ramin Sedaghati, Rama Bhat

Concordia University, Montreal, QC, Canada

Paper No. SMASIS2017-3755, pp. V002T03A009; 9 pages
doi:10.1115/SMASIS2017-3755
From:
  • ASME 2017 Conference on Smart Materials, Adaptive Structures and Intelligent Systems
  • Volume 2: Modeling, Simulation and Control of Adaptive Systems; Integrated System Design and Implementation; Structural Health Monitoring
  • Snowbird, Utah, USA, September 18–20, 2017
  • Conference Sponsors: Aerospace Division
  • ISBN: 978-0-7918-5826-4
  • Copyright © 2017 by ASME

abstract

The present study concerns with the performance of a skid landing gear (SLG) system of a rotorcraft impacting the ground at a vertical sink rate of 5.0 m/s. The impact attitude is per chapter 527 of the Airworthiness Manual (AWM) of Transport Canada Civil Aviation and FAR Part 27 of the U.S. Federal Aviation Regulation. A single degree of freedom helicopter model is investigated under two rotor lift factors 0.67 and 1.0. Three Configurations are evaluated: a) A conventional SLG; b) SLG equipped with a passive viscous damper and c) SLG incorporated with a magnetorheological energy absorber. The non-dimensional solutions of the helicopter model show that the passive damper system could reduce the maximum acceleration experienced by the helicopter occupants by 21% and 19.8% in comparison to the undamped system for the above rotor lift factors, respectively. However, the passive damper fails to constrain the non-dimensional energy absorption stroke of the damper within the given 18 cm maximum stroke and a bottoming out of the damper piston was noticed. Therefore, the alternative and successful choice was to employ a magnetorheological energy absorber (MREA). To improve the MREA controllability and to resettle the payload with no oscillations, i.e. in one cycle, two different Bingham numbers for compression stroke and rebound stroke were defined in the non-dimensional solution. Several simulations were conducted for different values of Bingham numbers. Among these numerical simulation results, the solution that implemented the optimum Bingham numbers was found to be the only one feasible solution. In this case the MREA with optimum Bingham number for compression could utilize the full energy absorption stroke to attain soft landing. In the rebound stroke, the generated optimal on-state damping force successfully controls the bounce of the payload until the payload settles down to its original equilibrium position with no oscillations.

Copyright © 2017 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In