0

Full Content is available to subscribers

Subscribe/Learn More  >

Evaluation of Stress-Increase Caused by Geometric Imperfections in Longitudinally-Welded Hot Reheat Steam Piping of Mod. 9Cr-1Mo Steel

[+] Author Affiliations
Haruhisa Shigeyama, Yukio Takahashi, Masatsugu Yaguchi

Central Research Institute of Electric Power Industry, Yokosuka, Japan

Paper No. PVP2017-65900, pp. V06AT06A070; 10 pages
doi:10.1115/PVP2017-65900
From:
  • ASME 2017 Pressure Vessels and Piping Conference
  • Volume 6A: Materials and Fabrication
  • Waikoloa, Hawaii, USA, July 16–20, 2017
  • Conference Sponsors: Pressure Vessels and Piping Division
  • ISBN: 978-0-7918-5799-1
  • Copyright © 2017 by ASME

abstract

In this paper, effect of geometric imperfections on peak stress in softened heat affected zone (HAZ) of longitudinally-welded hot reheat steam piping of mod. 9Cr-1Mo steel was investigated by parametric two-dimensional finite element analyses. Four parameters representing amount of ovalization, amount of flattening, range of flattening and amount of linear misalignment were used in order to express the geometric imperfections of the pipe. The peak stress of a longitudinally-welded pipe with a flattening ratio of about 1% reached about 1.5 times of mean diameter stress. Then, estimation formulas of the stress-increase factor were developed based on the results of finite element analyses. In addition, creep damage distributions were also calculated using three kinds of creep damage models and changes of the creep damage due to the geometric imperfections were compared. The ratios of creep damage increase due to the geometric imperfections were found to be equivalent in the three creep damage models applied.

Copyright © 2017 by ASME
Topics: Steel , Stress , Pipes , Steam

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In