0

Full Content is available to subscribers

Subscribe/Learn More  >

ASME Pressure Design of Class 1 Pipe Bends Using Elastic-Plastic FEA

[+] Author Affiliations
Usama Abdelsalam, Dk Vijay

Amec Foster Wheeler - Nuclear Canada, Toronto, ON, Canada

Andrew Glover

Bruce Power, L.P., Toronto, ON, Canada

Paper No. PVP2017-66113, pp. V03AT03A058; 8 pages
doi:10.1115/PVP2017-66113
From:
  • ASME 2017 Pressure Vessels and Piping Conference
  • Volume 3A: Design and Analysis
  • Waikoloa, Hawaii, USA, July 16–20, 2017
  • Conference Sponsors: Pressure Vessels and Piping Division
  • ISBN: 978-0-7918-5794-6
  • Copyright © 2017 by ASME

abstract

In a previous paper, it was demonstrated that a tight radius bend with uniform wall thickness equal to the pressure based thickness of the corresponding straight pipe does not meet the linear elastic criteria of NB-3221 Design Loadings. It was also demonstrated that the allowable wall thickness circumferential distribution of the ASME B&PV Code SEC XI Code Case N-597-2 achieves a uniform linear elastic stress intensity over the entire bend that meets the linear elastic criteria of NB-3221. As stated by the ASME B&PV Code under NB-3221, the provisions of NB-3228 may provide relief from certain of the linear elastic stress limits if plastic analysis techniques are applied.

In this paper, the plastic collapse analysis approach of the COG FFSG is adopted to explore the relative safety margin when analyzing various Class 1 tight radius pipe bends’ configurations made of Carbon Steel SA-106 Grade B. In addition to the power law material model, three elastic plastic material models are constructed based on ASME B&PV Code Section II Part D material properties. The pressure-based thickness for the same size straight pipe is uniformly used in modelling the tight radius bends (no increased thickness on the intrados). It is demonstrated that the results from the ASME B&PV based flow stress model are marginal and that the ASME B&PV based bi-linear material model and the limit analysis results are not meeting the collapse pressure criterion. It is also demonstrated that the uniform pressure-based thickness along with the power law material model meets the requirements for the adopted plastic collapse pressure providing a considerable life extension.

Copyright © 2017 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In