0

Full Content is available to subscribers

Subscribe/Learn More  >

The Effect of Temperature on Water Cavitation Phenomena in Converging-Diverging Nozzle Flow

[+] Author Affiliations
Zayed Ahmed, B. Terry Beck, Mohammad H. Hosni

Kansas State University, Manhattan, KS

Paper No. FEDSM2017-69544, pp. V002T13A008; 7 pages
doi:10.1115/FEDSM2017-69544
From:
  • ASME 2017 Fluids Engineering Division Summer Meeting
  • Volume 2, Fora: Cavitation and Multiphase Flow; Advances in Fluids Engineering Education
  • Waikoloa, Hawaii, USA, July 30–August 3, 2017
  • Conference Sponsors: Fluids Engineering Division
  • ISBN: 978-0-7918-5808-0
  • Copyright © 2017 by ASME

abstract

A vapor-compression refrigeration cycle typically uses standard refrigerants as the working fluid. Traditional refrigerants, however, have been associated with Ozone level Depletion Potential (ODP) and significant Global Warming Potential (GWP). An innovative cooling technology has been investigated using sonic multi-phase flow in a critical-flow nozzle to create a low-pressure and low-temperature region for heat absorption. The strength of the new technology is its potential to produce cooling using water and/or other working fluids with low ODP and GWP. While the full potential for using water as the working fluid may not be fully-realized, because of property limitations still under investigation, water still provides a very useful media for investigating the underlying cavitation phenomena for the development of the new technology.

As part of ongoing research into the potential cooling capacity of the cavitation phenomena, cavitation in a converging-diverging nozzle is being investigated using water as the working fluid. Cavitation in a fluid is the formation of the vapor phase from the liquid phase by reduction in the pressure of the fluid below its saturated vapor pressure. Due to the constricting nature of the throat of a converging-diverging nozzle, the liquid water velocity at the throat is increased and the local absolute pressure can drop to values below the saturated vapor pressure of water at a given temperature; thus, causing the fluid to cavitate.

The effect of water temperature on both the onset of the cavitation within the nozzle, and the resulting length of the cavitation region within the nozzle, are the subject of the current paper. Flow Visualization using a high speed digital camera under these different operating conditions was aimed at investigating the region of cavitation onset, which also appears to be associated with the region of boundary layer separation just downstream of the throat of the nozzle. The length of the two phase region at different operating temperatures was measured and it was observed that as the temperature of the fluid was increased, the length of two-phase region before it condensed into single-phase liquid became longer. Experimental results and analysis are presented which also show that near the onset of cavitation, the flowrate can likely go well beyond a choking condition without cavitating, and can remain in this metastable state for an extended amount of time before nucleating (cavitating) into a stable state. In particular, analysis indicates that significantly negative absolute pressures can likely be achieved within the nozzle, suggesting the presence of tension in the liquid phase just prior to cavitation.

Copyright © 2017 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In