0

Full Content is available to subscribers

Subscribe/Learn More  >

Noise Reduction Measures for an Axial Fan

[+] Author Affiliations
Andreas Swienty, Evgenii Palamarchuk, Raja Abou Ackl, Paul Uwe Thamsen

Technical University Berlin, Berlin, Germany

Paper No. FEDSM2017-69287, pp. V01AT03A022; 11 pages
doi:10.1115/FEDSM2017-69287
From:
  • ASME 2017 Fluids Engineering Division Summer Meeting
  • Volume 1A, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery
  • Waikoloa, Hawaii, USA, July 30–August 3, 2017
  • Conference Sponsors: Fluids Engineering Division
  • ISBN: 978-0-7918-5804-2
  • Copyright © 2017 by ASME

abstract

The aim of this work is to investigate how a reduction of the noise emissions can be achieved by means of an irregular arrangement of the blades of the fan impeller and an additional blade skewing.

For this purpose a fan impeller with a defined operating point is designed. Preliminary investigations have shown that a volumetric flow rate of 18 m3/h at a pressure of 200 Pa is required for cooling. Due to structural restrictions, only one axial impeller with a diameter of 68 mm can be used. The rotational speed of the electric motor is 10000 rpm. In a further step, the influences of the blade skewing and irregular arrangement of the blades are examined. These impellers are manufactured in a rapid prototyping process, which is a cost-effective and fast process. Thus, various variants can be examined to find the most suitable impeller. The study of the impellers is divided into two phases. Firstly, the fluid mechanical data of the impeller is measured. For this purpose, a chamber test stand is used to measure the characteristic curves of fan impellers. Thus, on the one hand, it can be examined whether the designed impeller reaches the operating point and, on the other hand, the influence of the noise reduction measures on the characteristic curves can also be evaluated. It is, of course, not desired that the noise reduction measures result in a deterioration of the pressure increase or in the volumetric flow rate. In the second phase, the noise generation of the impeller is measured in an installed state on an acoustic test stand. For this purpose, the impellers are installed in the electric motor and then acoustically examined in enveloping surface method according to DIN 45635.

It can be seen that the sound load can be reduced by 5.6 dB by a sufficient design of the impeller compared to a reference impeller. The further measures taken, such as the irregular arrangement of the blades and the blade skewing, have shown a further improvement of 1.6 dB. The influence of the implemented measures on the characteristic curve lies in a small area. It is measured that the pressure increase has fallen due to the irregular arrangement of the blades and the blade skewing by 10 Pa with a constant remaining flow rate.

Copyright © 2017 by ASME
Topics: Noise control

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In