0

Full Content is available to subscribers

Subscribe/Learn More  >

Heat Loss of Heated Deck Elements in Cross-Flow Wind

[+] Author Affiliations
Jino Peechanatt, Bjarte O. Kvamme, Ove T. Gudmestad, Yaaseen A. Amith

University of Stavanger, Stavanger, Norway

Paper No. OMAE2017-61588, pp. V008T07A027; 10 pages
doi:10.1115/OMAE2017-61588
From:
  • ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering
  • Volume 8: Polar and Arctic Sciences and Technology; Petroleum Technology
  • Trondheim, Norway, June 25–30, 2017
  • Conference Sponsors: Ocean, Offshore and Arctic Engineering Division
  • ISBN: 978-0-7918-5776-2
  • Copyright © 2017 by ASME

abstract

In recent years, there has been unprecedented interest shown in the Arctic region by the industry, as it has become increasingly accessible for oil and gas exploration, shipping, and tourism. The decrease in ice extent in the Arctic has renewed the interest in the Northern Sea route, necessitating further research to evaluate the adequacy of the equipment and appliances used on vessels traversing in polar waters.

The introduction of the Polar Code by the International Maritime Organization (IMO) attempts to mitigate some of the risks endangering the vessels in Polar waters. The Polar Code is scheduled to take effect on 01.01.2017, and applies to all vessels traversing in polar waters. One of the requirements in the Polar Code is that means shall be provided to remove or prevent accretion of snow and/or ice from escape routes, embarkation areas and access points. Even though, prior to the formulation of Polar Code, the requirement for de-icing the deck surfaces on vessels already exists, the suitability of the equipment currently in use is debatable. Large amounts of energy is required to maintain an ice-free surface, which is not desirable economically or environmentally, due to the substantial increase in fuel consumption.

In this study, a heated deck element manufactured by GMC Maritime AS is subjected to cross flow wind of 5 m/s, 10 m/s and 15 m/s at various sub-zero temperatures in GMC Maritime AS’s climate laboratory in Stavanger, Norway. The deck element is rated to 1400 W / m2, and is one of the designs provided by GMC Maritime AS. The power consumption of the deck element is measured and compared to theoretical heat loss calculations. Large discrepancies between the measured power consumption and the theoretical heat loss were discovered, indicating the need for further studies on the matter.

As part of SARex Spitzbergen 2016, a search and rescue exercise conducted off North Spitzbergen, heated deck elements on board the Norwegian Coast Guard Vessel KV Svalbard were studied and are discussed in this paper. The heating elements in the deck elements were designed to specifications at the time of commissioning, but proves insufficient when the vessel is in transit or exposed to slight winds, allowing snow and ice to accumulate on the surface.

Finally, suggestions for a more energy efficient design of deck elements are made, as the current designs are found to have potential for improvement, especially due to the lack of insulation between the deck elements and the hull of the vessel.

Copyright © 2017 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In