0

Full Content is available to subscribers

Subscribe/Learn More  >

Concrete Modeling for Extreme Wave Slam Events

[+] Author Affiliations
Kasper Wåsjø

Aqualine AS, Trondheim, Norway

Terje P. Stavang

Statoil ASA, Stjørdal, Norway

Tore H. Søreide

Olav Olsen AS, Trondheim, Norway

Paper No. OMAE2017-61331, pp. V03AT02A018; 7 pages
doi:10.1115/OMAE2017-61331
From:
  • ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering
  • Volume 3A: Structures, Safety and Reliability
  • Trondheim, Norway, June 25–30, 2017
  • Conference Sponsors: Ocean, Offshore and Arctic Engineering Division
  • ISBN: 978-0-7918-5765-6
  • Copyright © 2017 by ASME

abstract

Experience from model tests has initiated a growing attention towards extreme wave slam as a critical load situation for offshore large volume structures. Most of the problem is related to the local slam pressure, which may go up to several MPa’s for 100-year and 10 000-year waves.

The paper deals with modeling techniques for marine concrete structures under extreme slam loading from waves where dynamic effects together with material softening play a major role for the response. Different analysis approaches for ultimate limit state (ULS) and accidental limit state (ALS) controls are discussed in view of reliability philosophy as basis for conventional design approach.

The present paper is devoted to the local impact scenario and the alternative approaches for response and capacity control involving non-linear time domain analyses. Conventional design schemes as based on linear elastic models for response calculation together with code specified capacity control often come out more conservative than non-linear approach. The paper demonstrates by case studies how softening of the structure in general reduces the response in terms of section forces.

A key issue when going from conventional linear approaches into non-linear techniques is to still keep an acceptable reliability level on the capacity control. Load and material factors are normally based on structures with limited non-linearity where linear response modeling is representative. Implementing non-linear material model in time domain analysis has a major challenge in limiting the sensitivity in response and capacity calculation. The paper demonstrates the way material model of concrete affects the section forces to go into local capacity control, and concludes on needed sensitivity analyses.

Practical approaches on the concrete slam problem together with resulting utilizations from the control are demonstrated. The full non-linear technique by response and capacity control in one analysis is also handled, using average material parameters and justifying safety factors for the effect of implementing characteristic lower strength of concrete in the capacity.

The paper ends up in a recommendation on non-linear time domain analysis procedure for typically slam problems. A discussion is also given on applicable design codes with attention to non-linear analysis.

Copyright © 2017 by ASME
Topics: Concretes , Waves , Modeling

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In