0

Full Content is available to subscribers

Subscribe/Learn More  >

CFD Verification and Validation Study for a Captive Bullet Entry in Calm Water

[+] Author Affiliations
António Maximiano, Guilherme Vaz, Jule Scharnke

Maritime Research Institute Netherlands, Wageningen, Netherlands

Paper No. OMAE2017-61666, pp. V001T01A006; 13 pages
doi:10.1115/OMAE2017-61666
From:
  • ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering
  • Volume 1: Offshore Technology
  • Trondheim, Norway, June 25–30, 2017
  • Conference Sponsors: Ocean, Offshore and Arctic Engineering Division
  • ISBN: 978-0-7918-5763-2
  • Copyright © 2017 by ASME

abstract

As a step towards complex impact loads cases, e.g. lifeboat drop tests or ship/platform slamming in waves, a verification and validation (V&V) study is carried out with an open-usage community based CFD code ReFRESCO for a simple impact load test case: a captive axisymmetric generic lifeboat shape (bullet) that penetrates the water surface at a constant velocity and angle of attack. The quantities of interest are the body fixed longitudinal force FX, vertical force FZ, and pitch moment MYY.

The influence of the iterative convergence level, domain size and free surface modelling are investigated. Seven different grids and four time steps were used to assess the grid and time step sensitivity, in a total of 28 calculations. For the tested grids and time steps it was found that the results are more sensitive to the grid resolution than to the time step. The pressure distribution on the hull is correlated with the trends observed in the loads, and the relation between between relative and static pressure is found to be important for the calculated loads. An experimental test campaign was previously carried out by MARIN, and its results are used to validate the simulations performed. A very good match between experiments and simulations is found.

A V&V study is performed for the quantities of interest at nine different time instants covering the impact phase. The numerical uncertainties are obtained from a solution verification procedure [1]. The experimental uncertainties are estimated, and a validation exercise carried out according to the ASME standards [2]. The outcome of the validation exercise is an estimated 95 % confidence interval for the modelling error, δM. For FX the modelling error is below 15 N, for 8 out of 9 time instants. For FZ the modelling error is below 14 N, except at the time instants where, due to vibrations in the experimental setup, a larger value (up to 23 N) is found. For MYY the modelling error is under 5N m. These results provide confidence in ReFRESCO for the simulation of free surface impact flows.

Copyright © 2017 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In