0

Full Content is available to subscribers

Subscribe/Learn More  >

Mode Shapes and Dominant Frequency Predictions in a Swirl Stabilized Premixed Air-Methane Combustor Using Modal Analysis and Large Eddy Simulations (LES)

[+] Author Affiliations
Tushar Jadhav, Saurabh Patwardhan, Pravin Nakod

ANSYS Inc., Pune, India

Stefano Orsino

ANSYS Inc., Lebanon, NH

Paper No. GT2017-65125, pp. V04BT04A071; 8 pages
doi:10.1115/GT2017-65125
From:
  • ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition
  • Volume 4B: Combustion, Fuels and Emissions
  • Charlotte, North Carolina, USA, June 26–30, 2017
  • Conference Sponsors: International Gas Turbine Institute
  • ISBN: 978-0-7918-5085-5
  • Copyright © 2017 by ASME

abstract

Stringent emission regulations force the gas turbine combustor community to come up with new designs. Lean Premixed (LPM) combustion is gaining popularity to meet the emission regulations. However, lean combustion process is prone to other issues like combustion instabilities and noise. Self-excited combustion instabilities in a gas turbine play vital role in the life cycle of combustor, noise generation and pollutant formation. If the instabilities in combustor dominate at natural modes, there are risks of resonance which can lead to bursting damage to the combustors.

In the present work, modal analysis is carried out to predict the longitudinal and the transverse modes in a swirl-stabilized premixed methane-air combustor. The geometrical details and the boundary conditions used in this work are described in Broda et al. [1]. In addition to the modal analysis, Large Eddy Simulations (LES) with Flamelet Generation Manifold (FGM) combustion model are carried out to find out the instabilities and their sources. In the large eddy simulation, at the inlet of the combustor, a broadband impedance boundary condition is used. This will consider the effect of upstream travelling acoustic waves at the inlet. The outlet of combustor is specified with non-reflecting boundary condition. The inlet mass flow rate and the temperature conditions are consistent with Broda et al. [1]. The longitudinal and transverse modes predicted by the modal analysis and the dominant frequency predicted in the LES case are compared with the experimentally observed values. The predicted first longitudinal mode at ∼1760 Hz compares well with the experimental value of 1760 Hz. Predicted values of first and second tangential modes at 10459 Hz and 17344 Hz are also in good agreement with the experimental measurement. The dominant frequency predicted by the LES simulation is 1940 Hz. After applying the appropriate correction to this value for the wall heat transfer effect, it is in-line with that obtained from the modal analysis and the experiments. The spectral analysis at different probe location in LES simulation shows higher thermo-acoustic coupling at natural frequencies. In this work, the effect of variation in inlet swirl number and the temperature is also studies. The predicted trends in the change in dominant frequency with the increase in inlet swirl number and inlet temperature are captured accurately. For each condition, calculations were performed for about four flow-through times (around 12 ms) after the flow field had reached to its limit cycle to obtain statistically steady condition.

Copyright © 2017 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In