0

Full Content is available to subscribers

Subscribe/Learn More  >

Water Injection Evaporation in Frame 7EA Gas Turbine Wrapper

[+] Author Affiliations
Michele Bianchi, Andrea De Pascale, Francesco Melino, Antonio Peretto

Università di Bologna, Bologna, Italy

Sasha Savic

SS&A Power Consultancy, Wettingen, Switzerland

Paper No. GT2017-64189, pp. V003T23A006; 12 pages
doi:10.1115/GT2017-64189
From:
  • ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition
  • Volume 3: Coal, Biomass and Alternative Fuels; Cycle Innovations; Electric Power; Industrial and Cogeneration Applications; Organic Rankine Cycle Power Systems
  • Charlotte, North Carolina, USA, June 26–30, 2017
  • Conference Sponsors: International Gas Turbine Institute
  • ISBN: 978-0-7918-5083-1
  • Copyright © 2017 by ASME

abstract

A Southern California cogeneration plant is comprised of four GE-made Frame No 7, Model EA, heavy duty gas turbines driving Electrical Generators. Turbine exhaust gases are routed into the heat recovery steam generators (HRSG) of the split level. The HRSG are furnished with supplemental firing in order to boost the production of the steam.

The produced NOX abatement is realized by the continuous steam injection and selective catalyst reduction (SCR).

In order to reduce the steam consumption for NOX abatement, water injection in combustion chamber can be taken into account. Unfortunately, available gas turbine combustor cannot be used to inject water directly into the liner (and thus maximize the impact of water injection compared to steam injection); for this reason, an alternative solution was investigated which consists on water injection into the combustor wrapper. By doing this, effects on NOX abatement are similar to those of steam injection for power augmentation, namely only about 30% of water injected this way will actually quench the NOX, the rest flowing through the dilution holes. To ensure no impact of water injection on the combustor hardware’s integrity, any liquid droplets injected into the wrapper shall evaporate prior to reaching the liner.

In order to estimate the behavior of liquid water droplets injected into the wrapper, a calculation code was developed by University of Bologna. This calculation code is able to estimate the evaporation rate of a spray of liquid water by calculating the droplets diameter reduction, the air temperature drop, etc. as function of boundary conditions.

More in details, the aim of this study is to estimate the maximum droplet sizes to ensure the full evaporation of the water and to eliminate negative effects on the combustor life. In order to achieve this goal, a parametric study has been developed, changing the droplet size to calculate the time needed for full evaporation and compare this with the time of droplet travel from the injection point to the first dilution holes of the combustor liner. More in details, it was calculated, under various gas turbine operating conditions, what would be the maximal droplet size needed to evaporate within the available residence time into the wrapper.

Copyright © 2017 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In