0

Full Content is available to subscribers

Subscribe/Learn More  >

Tool-Chip Interface Temperature Measurement in Interrupted and Continuous Oblique Cutting

[+] Author Affiliations
Sinan Kesriklioglu, Justin D. Morrow, Frank E. Pfefferkorn

University of Wisconsin-Madison, Madison, WI

Paper No. MSEC2017-2934, pp. V003T04A068; 7 pages
doi:10.1115/MSEC2017-2934
From:
  • ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing
  • Volume 3: Manufacturing Equipment and Systems
  • Los Angeles, California, USA, June 4–8, 2017
  • Conference Sponsors: Manufacturing Engineering Division
  • ISBN: 978-0-7918-5074-9
  • Copyright © 2017 by ASME

abstract

The objective of this work is to fabricate instrumented cutting tools with embedded thermocouples to accurately measure the tool-chip interface temperature in interrupted and continuous turning. Thin-film thermocouples were sputtered directly onto the flat rake face of a commercially available tungsten carbide cutting insert using micro machined stencils and coated the measurement junction with a protective layer to obtain temperature data 1.3 μm below the tool-chip interface. Oblique interrupted cutting tests on AISI 12L14 steel were performed to observe the influence of varying cutting speeds and cooling intervals on tool chip interface temperature. An additional cutting experiment was conducted to monitor the interface temperature change between interrupted and continuous cuts.

Copyright © 2017 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In