0

Full Content is available to subscribers

Subscribe/Learn More  >

Experimental Tool Wear Observation of Assisted High Pressure Cryogenic Jet in Hard Turning Process

[+] Author Affiliations
Dong Min Kim, Do Young Kim, In Su Jo, Hyung Wook Park

Ulsan National Institute of Science and Technology, Ulju-Gun, South Korea

Tae Jin Song, Kyung Soo Paik

HYUNDAI WIA R&D, Uiwang-si, Republic of Korea

Paper No. MSEC2017-2935, pp. V001T02A018; 9 pages
doi:10.1115/MSEC2017-2935
From:
  • ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing
  • Volume 1: Processes
  • Los Angeles, California, USA, June 4–8, 2017
  • Conference Sponsors: Manufacturing Engineering Division
  • ISBN: 978-0-7918-5072-5
  • Copyright © 2017 by ASME

abstract

The hard turning process is widely used in automobile and heavy machinery industries. Extreme cutting conditions like high temperature and tool wear rate, are associated with the hard turning process. Cubic boron nitride (CBN) cutting tool is generally preferred for hard machining operations. However, higher tool cost, and tool failure due to thermal shock limits its widespread usage. In machining performance analysis, tool wear is an important parameter which is directly related to the cost of the machining process. Previous studies have reported the improvement in tool life by using cryogenic coolant as a cutting fluid. Objective of this paper is to investigate the effect of cryogenic cooling on the tool wear of CBN and Ti-coated alumina ceramic cutting tools used in the hard turning of AISI 52100 hardened steel. High pressure cryogenic jet (HPCJ) module was optimized and configured to use it for hard turning case. Computational fluid dynamics (CFD) based simulation was used to test and optimize the nozzle design for the flow of cryogenic coolant. It was validated by fundamental heat removal test. Ceramic and CBN cutting tools were then used for hard turning of parts using HPCJ module. Flank wear lengths for various cooling conditions were measured and analyzed. It was observed that the higher tool life of a Ti-coated alumina ceramic can be achieved under cryogenic cooling technique, as compared to the CBN insert under dry conditions. Cost analysis of these hard turning cases was also conducted to check the feasibility of its usage under realistic shop floor conditions. It was observed that the machining using Ti-coated ceramic under cryogenic jet may reduce the total tooling cost compared to CBN cutting tool conducted under dry conditions.

Copyright © 2017 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In