0

Full Content is available to subscribers

Subscribe/Learn More  >

Quantifying the Linearity of the Fluid Dynamics for Noncontacting Annular Seals

[+] Author Affiliations
Cori Watson, Wisher Paudel, Houston G. Wood, Brian K. Weaver

University of Virginia, Charlottesville, VA

Paper No. IMECE2016-66804, pp. V04AT05A041; 6 pages
doi:10.1115/IMECE2016-66804
From:
  • ASME 2016 International Mechanical Engineering Congress and Exposition
  • Volume 4A: Dynamics, Vibration, and Control
  • Phoenix, Arizona, USA, November 11–17, 2016
  • Conference Sponsors: ASME
  • ISBN: 978-0-7918-5054-1
  • Copyright © 2016 by ASME

abstract

Non-contacting annular seals are used in turbomachinery to reduce the leakage of working fluid. The leakage is caused by a pressure differential across the seal and is reduced through textures cut into the surface of the seal. Three common types of non-contacting annular seals are labyrinth seals, hole-pattern seals, and helical groove seals. Labyrinth seals have circumferentially cut grooves as their surface texture. Helical groove seals have continuously cut grooves following a helical path along the surface. Hole-pattern seals have holes patterned across the surface. Each surface texture causes different flow patterns and sealing mechanisms.

These non-contacting annular seals can have textures cut across the surface of the rotor, the surface of the stator, or both. The goal of this study is to determine the degree to which the flow of seals with textures on both surfaces can be viewed as the superposition of the flow for a seal with the rotor surface textured and a smooth stator combined with the flow for a seal with the stator surface textured and a smooth rotor. To accomplish this goal, simulations were run in ANSYS CFX for each seal type and configuration for a variety of rotor speeds and pressure ratios to compare superimposed solutions to standard 3D solutions.

The ability to superimpose solutions to a differential equation — and therefore a fluid dynamics system — is determined by the linearity of the differential equation. By comparing the superimposed solution with the standard solution, this study will quantify the degree of non-linearity in the system. The degree of divergence away from linearity will be compared against the rotor speed and pressure ratio, which are proportional to the Reynold’s number. The Navier-Stokes equation contains a non-linear inertial force term. The relative significance of the inertia forces is predicted by the Reynold’s number so a strong correlation is expected between the Reynold’s number and the agreement between the flow found by superposition and the flow found by the actual seal model.

The other application of this research is to the computational modeling of annular seals. Annular seals can be computationally demanding and time consuming to model. This is especially true for seals with texture on both surfaces where millions of finite volumes may be needed in the simulation in order to find a convergent solution. For rotor speeds with strong agreement between the actual flow and the superimposed flow, superposition can be applied to perform faster simulations of seals with texture on both surfaces.

Copyright © 2016 by ASME
Topics: Fluid dynamics

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In