0

Full Content is available to subscribers

Subscribe/Learn More  >

Fracture-Mechanics Analysis of the Reactor Pressure Vessel Beznau 1 Based on Thermal-Hydraulics Input Data From KWU-MIX and CFD Analyses

[+] Author Affiliations
Tomas Nicak, Richard Trewin, Elisabeth Keim, Ingo Cremer, Sebastien Blasset

AREVA GmbH, Erlangen, Germany

Heinz Hägeli

Axpo AG NPP Beznau, Döttingen, Switzerland

Paper No. PVP2016-63459, pp. V06AT06A065; 9 pages
doi:10.1115/PVP2016-63459
From:
  • ASME 2016 Pressure Vessels and Piping Conference
  • Volume 6A: Materials and Fabrication
  • Vancouver, British Columbia, Canada, July 17–21, 2016
  • Conference Sponsors: Pressure Vessels and Piping Division
  • ISBN: 978-0-7918-5042-8
  • Copyright © 2016 by ASME

abstract

The integrity of a reactor pressure vessel (RPV) has to be ensured throughout its entire life in accordance with the applicable regulations. Typically an assessment of the RPV against brittle failure needs to be conducted by taking into account all possible loading cases. One of the most severe loading cases, which can potentially occur during the operating time, is the loss-of-coolant accident, where cold water is injected into the RPV nearly at operating conditions. High pressure in combination with a thermal shock of the ferritic pressure vessel wall caused by the injection of cold water leads to a considerable load at the belt-line area known as Pressurized Thermal Shock (PTS).

Usually the assessment against brittle failure is based on a deterministic fracture-mechanics analysis, in which common parameters like J-integral or stress intensity factor are employed to calculate the load path for an assumed (postulated) flaw during the PTS event.

The most important input data for the fracture-mechanics analysis is the transient thermal-hydraulics (TH) load of the RPV during the emergency cooling. Such data can be calculated by analytical fluid-mixing codes verified on experiments, such as KWU-MIX, or by numerical Computational Fluid Dynamics (CFD) tools after suitable validation. In KWU-MIX, which is the standard used for TH calculations within PTS analyses, rather conservative analytical models for the quantification of mixing and, depending on the water level, condensation processes in the downcomer (including simplified stripe and plume formations) are utilized. On the contrary, the numerical CFD tools can provide best-estimate results due to the possibility to consider more realistically the stripe and plume formations as well as the geometry of the RPV in detail.

In order to quantify the safety margin inherent to the standard approach, two fracture-mechanics analyses of the RPV Beznau 1 based on thermal-hydraulic input data from KWU-MIX and CFD analyses were performed. Subsequently the resulting loading paths were compared between each other and with material properties obtained from the irradiation surveillance program of the RPV to demonstrate the exclusion of brittle-fracture initiation.

Copyright © 2016 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In