0

Full Content is available to subscribers

Subscribe/Learn More  >

Analysis of Engine Air Handling Systems for Light-Duty Compression Ignition Engines Using 1-D Cycle Simulation: Achieving High Dilution Levels for Advanced Combustion

[+] Author Affiliations
Nandini Gowda Kodebyle Raju, Adam Dempsey, Scott Curran

Oak Ridge National Laboratory, Knoxville, TN

Paper No. ICEF2016-9459, pp. V001T03A020; 14 pages
doi:10.1115/ICEF2016-9459
From:
  • ASME 2016 Internal Combustion Engine Division Fall Technical Conference
  • ASME 2016 Internal Combustion Engine Division Fall Technical Conference
  • Greenville, South Carolina, USA, October 9–12, 2016
  • Conference Sponsors: Internal Combustion Engine Division
  • ISBN: 978-0-7918-5050-3
  • Copyright © 2016 by ASME

abstract

Previous research studies have shown that low temperature combustion (LTC) strategies are capable of achieving very low NOx and soot emissions while maintaining high thermal efficiency. To achieve LTC, there has to be sufficient mixing time between the fuel and air in a dilute, yet overall lean, environment. Dilution with a combination of fresh air and exhaust gas recirculation (EGR) is typically used to achieve longer mixing times and reduce the peak combustion temperatures. However, there are challenges associated with today’s engine air handling systems’ ability to move large combinations of EGR and air simultaneously. As the EGR demand is increased to reduce NOx emissions or retard combustion phasing, the global equivalence ratio tends to increase because of the boosting systems’ limited ability to supply fresh air. In this study, a one-dimensional engine modeling approach was used to analyze the behavior of a production light duty diesel engine equipped with a variable geometry turbocharger and a high-pressure loop EGR system under LTC conditions. The model is used to predict the global equivalence ratio as a function of the EGR level at a variety of operating conditions. The EGR level was varied from 0 to 50% at speeds ranging from 1,500 to 2,500 rpm and loads from 2 to 10 bar brake mean effective pressure. The objective of this study is to evaluate the air handling system’s capability of driving high amounts of EGR and air simultaneously for light duty engines to successfully achieve LTC operation over a large portion of the operating space. The results of the simulations show that at light loads, large amounts of EGR can be used while maintaining globally lean operation. However, as the engine load increases, a globally stoichiometric condition is reached relatively quickly, and high engine loads with greater than 30% EGR and overall lean conditions were achievable.

Copyright © 2016 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In