0

Full Content is available to subscribers

Subscribe/Learn More  >

Numerical Investigation of Flow Structure and Heat Transfer Produced by a Single Highly Confined Bubble in a Pressure-Driven Channel Flow

[+] Author Affiliations
John R. Willard, D. Keith Hollingsworth

University of Alabama in Huntsville, Huntsville, AL

Paper No. HT2016-1060, pp. V002T21A002; 10 pages
doi:10.1115/HT2016-1060
From:
  • ASME 2016 Heat Transfer Summer Conference collocated with the ASME 2016 Fluids Engineering Division Summer Meeting and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels
  • Volume 2: Heat Transfer in Multiphase Systems; Gas Turbine Heat Transfer; Manufacturing and Materials Processing; Heat Transfer in Electronic Equipment; Heat and Mass Transfer in Biotechnology; Heat Transfer Under Extreme Conditions; Computational Heat Transfer; Heat Transfer Visualization Gallery; General Papers on Heat Transfer; Multiphase Flow and Heat Transfer; Transport Phenomena in Manufacturing and Materials Processing
  • Washington, DC, USA, July 10–14, 2016
  • Conference Sponsors: Heat Transfer Division
  • ISBN: 978-0-7918-5033-6
  • Copyright © 2016 by ASME

abstract

Confined bubbly flows in millimeter-scale channels produce significant heat transfer enhancement when compared to single-phase flows. This enhancement has been demonstrated in experimental studies, and some of these studies conclude that the enhancement persists even in the absence of active nucleation sites and bubble growth. This observation leads to the hypothesis that the enhancement is driven by a convective phenomenon in the liquid phase around the bubble instead of sourcing from microlayer evaporation or active nucleation. Presented here is a numerical investigation of flow structure and heat transfer due to a single bubble moving through a millimeter-scale channel in the absence of phase change. The simulation includes thermal boundary conditions designed to match those of a recent experiment. The channel is horizontal with a uniform-heat-generation upper boundary condition and an adiabatic lower boundary condition. The Lagrangian framework allows the simulation of a channel of arbitrary length using this smaller computational domain. The fluid phases are modeled using the Volume-of-Fluid method with full geometric reconstruction of the liquid/gas interface. The liquid around the bubble moves as a low-Reynolds-number unsteady laminar flow.

In a square region from the trailing edge of the contact line to one nominal bubble diameter behind the bubble, the area-averaged Nusselt number is, at its greatest, 4.7 times the value produced by a single-phase flow. Bubble shape and speed compare well to observations from the recent experiment.

The heat transfer enhancement can be attributed to flow structures created by bubble motion. Multiple regions have been observed and are differentiated by their respective vortex characteristics. The primary region exists directly behind the bubble and exhibits the highest enhancement in heat transfer. It contains channel-spanning vortices that move cold fluid along the centerline and edge of the vortices from near the far wall of the channel to the heated wall. The cold fluid delivered by this motion tends to thin the thermal gradient region near the wall and directly behind the bubble and results in the highest local heat transfer coefficients. This vortex drives a bulk exchange of fluid across the channel and elongates the area of heat transfer enhancement to several bubble diameters. The secondary region is a set of vortices that exist to the side and slightly behind the bubble. These vortices rotate at a shallow angle to the primary flow direction and are weaker than those in the other regions.

Copyright © 2016 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In