Full Content is available to subscribers

Subscribe/Learn More  >

Improvement of Pipeline Fatigue Life Estimation

[+] Author Affiliations
Sanjay Tiku, Aaron Dinovitzer, Vlad Semiga

BMT Fleet Technology Limited, Ottawa, ON, Canada

Mark Piazza

Colonial Pipeline Company, Alpharetta, GA

Tom Jones

Marathon Pipe Line LLC, Findlay, OH

Paper No. IPC2016-64479, pp. V001T03A026; 10 pages
  • 2016 11th International Pipeline Conference
  • Volume 1: Pipelines and Facilities Integrity
  • Calgary, Alberta, Canada, September 26–30, 2016
  • Conference Sponsors: Pipeline Division
  • ISBN: 978-0-7918-5025-1
  • Copyright © 2016 by ASME


Fracture mechanics methodologies for calculating fatigue lives have been successfully applied by pipeline operators to estimate integrity reassessment intervals. Their application in the definition of pipeline system fatigue lives has been overly conservative in actual practice. The source and magnitude of the conservatism inherent in the calculated fatigue life estimates needs to be identified so operators have a better indicator of when reassessments should take place. The pipe life estimation is especially critical for Electric Resistance Weld (ERW) and Electric Flash Weld (EFW) pipeline systems with longitudinally oriented defects.

Prior work on improving fatigue life was initiated through studies completed by Pipeline Research Council International, Inc. (PRCI) to evaluate the sources of differences between fatigue life estimates produced by industry fatigue analysis software and different metallurgists. Two significant sources of conservatism in the fatigue life estimation process were identified: the fatigue crack growth rate (da/dN) and the bulging correction factor applied to axial surface flaws. The experimental and numerical simulation techniques considering the impact of these factors on rate of fatigue crack growth of pipeline axially oriented defects are described in this paper.

Finite element modeling was used to simulate pipe bulging in the presence of axial flaws. The effect of the pipe thickness, diameter and flaw geometry was compared with treatments included in existing defect assessment standards. The results illustrate that for longer and deeper flaws existing treatments over represent the local bending due to pipe wall bulging. This results in unnecessarily conservative (shorter) fatigue life estimates.

The crack growth rate (da/dN) was measured in a compact tension specimen material fatigue testing program. The test results included a range of ERW and EFW pipe materials with varying vintages and grades. The measured fatigue crack growth rate for the materials tested was found to be lower than that recommended by existing industry standards. This adds to the over conservatism of current approaches.

The numerical simulation and materials testing results and related recommendations presented in this paper are compared to existing codified treatments to quantify the level of conservatism inherent in the current state of practice. Recommendations are provided to enhance the precision and better manage conservatism in fatigue crack growth rate calculations. Increased accuracy serves to improve integrity management and would be of interest to pipeline operators, consultants and regulators.

Copyright © 2016 by ASME



Interactive Graphics


Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In