0

Full Content is available to subscribers

Subscribe/Learn More  >

A Life-Cycle Approach to the Assessment of Pipeline Dents

[+] Author Affiliations
Michael Turnquist

Quest Integrity, Boulder, CO

Ian Smith

Quest Integrity, London, ON, Canada

Paper No. IPC2016-64460, pp. V001T03A024; 10 pages
doi:10.1115/IPC2016-64460
From:
  • 2016 11th International Pipeline Conference
  • Volume 1: Pipelines and Facilities Integrity
  • Calgary, Alberta, Canada, September 26–30, 2016
  • Conference Sponsors: Pipeline Division
  • ISBN: 978-0-7918-5025-1
  • Copyright © 2016 by ASME

abstract

The application of in-line inspection (ILI) to assess pipelines for various anomalies is standard practice in the pipeline industry. When ILI data identifies the presence of anomalies such as denting or ovalization, current convention is to perform either a depth-based or strain-based assessment to assess the severity. Although a strain-based methodology is generally accepted in the pipeline industry, this approach does not address all of the primary damage mechanisms associated with pipeline dents. Assessment based upon either depth or strain alone may not only provide non-conservative results but also fail to properly rank dents in order of their true severity. A life-cycle assessment approach that considers the damage caused by the dent formation, the stress intensification effect of the dent profile, and the severity of future pressure cycling provides an improved understanding of the probability of failure, allowing for more informed integrity management decision making.

Strain-based assessment of dents in pipelines is typically performed by calculating the local curvatures in the dent geometry as measured by ILI. Local strains are then calculated based on these local curvatures. However, this approach does not address that once a dent has been formed, continued pressure cycling at that location is what will ultimately cause a failure. The current strain-based methodology does not account for the severity of the pressure cycling at the dent.

A new and innovative methodology has been developed which takes a life-cycle approach to the assessment of pipeline dents. This approach estimates the remaining life of a dent based on fatigue damage accumulation. Finite element analysis (FEA) is used to calculate various stress concentration factors (SCFs) based on the geometry of the dent. These SCFs are used to calculate an equivalent alternating stress for a unit pressure cycle event. Past representative pressure cycling data is gathered using a rainflow counting approach. The amount of damage accumulated during each pressure cycle is calculated using stress or strain based (S-N) fatigue curves; this allows for a damage rate to be calculated based on past operational history. A remaining life can be estimated based on this damage rate and an estimation of the initial fatigue damage accumulated during formation of the dent. This estimation is made based on previous elastic-plastic FEA of various scenarios which simulate the formation and shakedown of a pipeline dent.

Case studies which explore the use of different assessment methods to analyze dents will be presented. A comparison of different assessment methodologies will illustrate the improved understanding of the probability of failure of dents based upon the life-cycle assessment.

Copyright © 2016 by ASME
Topics: Pipelines , Cycles

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In