0

Full Content is available to subscribers

Subscribe/Learn More  >

Experimental Investigation of Heat Transfer Augmentation by Different Jet Impingement Hole Shapes Under Maximum Crossflow

[+] Author Affiliations
Prashant Singh, Bharath Viswanath Ravi, Srinath Ekkad

Virginia Tech, Blacksburg, VA

Paper No. GT2016-57874, pp. V05BT16A018; 11 pages
doi:10.1115/GT2016-57874
From:
  • ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition
  • Volume 5B: Heat Transfer
  • Seoul, South Korea, June 13–17, 2016
  • Conference Sponsors: International Gas Turbine Institute
  • ISBN: 978-0-7918-4979-8
  • Copyright © 2016 by ASME

abstract

To achieve higher overall efficiency in gas turbine engines, hot gas path components are subjected to high heat transfer loads due to higher turbine inlet temperatures. Jet impingement has been extensively used especially as an internal cooling technique in the leading edge and mid-chord region of first stage vanes, which are subjected to highest heat loads. With the advent of additive manufacturing methods such as Direct Metal Laser Sintering (DMLS), designers are not limited to designing round or race track holes for impingement. The present study is focused on exploring new jet hole shapes, in an arrangement, typical of mid-chord region in a double wall cooling configuration. Transient liquid crystal experiments are carried out to study heat transfer augmentation by jet impingement on smooth target where the spent air is allowed to exit in one direction, thus imposing maximum crossflow condition. The averaged Reynolds number (based on jet hydraulic diameter) is varied from 2500 to 10000. The jet plate has a square array of jets with 7 jets in one row (total number of jets = 49), featuring hole shapes — Racetrack and V, where the baseline case is the round hole. The non-dimensional streamwise (x/dj) and spanwise (y/dj) spacing is 6 and the normalized jet-to-target-plate spacing (z/dj) is 4 and the nozzle aspect ratio (L/dj) is also 4. The criteria for the hole shape design was to keep the effective area of different hole shapes to be the same, which resulted in slightly different hydraulic diameters. The jet-to-target plate spacing (z) has been adjusted accordingly so as to maintain a uniform z/dj of 4, across all three configurations studied. Heat transfer coefficients are measured using a transient Liquid Crystal technique employing a one-dimensional semi-infinite model. Flow experiments are carried out to measure static pressures in the plenum chamber, to calculate the discharge coefficient, for a range of plenum absolute pressure-to-ambient pressure ratios. Detailed normalized Nusselt number contours have been presented, to identify the regions of high heat transfer augmentation locally, so as to help the designers in the organization of jet hole shapes and their patterns in an airfoil depending upon the active heat loads.

Copyright © 2016 by ASME
Topics: Heat transfer , Shapes

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In