0

Full Content is available to subscribers

Subscribe/Learn More  >

Thermal Stress Measurement in Continuous Welded Rails Using the Hole-Drilling Method

[+] Author Affiliations
Xuan Zhu, Francesco Lanza di Scalea

University of California, San Diego, La Jolla, CA

Mahmood Fateh

Federal Railroad Administration, Washington, DC

Paper No. JRC2016-5719, pp. V001T06A002; 10 pages
doi:10.1115/JRC2016-5719
From:
  • 2016 Joint Rail Conference
  • 2016 Joint Rail Conference
  • Columbia, South Carolina, USA, April 12–15, 2016
  • Conference Sponsors: Rail Transportation Division
  • ISBN: 978-0-7918-4967-5
  • Copyright © 2016 by ASME

abstract

Continuous Welded Rail (CWR) has been widely used in modern railway system for it provides smooth ride, higher freight speed, and less maintenance. A major safety concern with this type of structure is the absence of the expansion joints and the potential of buckling in hot weather. According to the FRA safety statistics, the track alignment irregularity is one of the leading factors responsible for the accidents and the most economic/environmental damages, among all the railway accident causes. However, the thermal stress measurement in the CWR for buckling prevention has been an unresolved problem in railroad maintenance.

In this study, a method is introduced to determine the in-situ thermal stress of the in-service CWR by using the Hole-Drilling method. The ASTM Hole-Drilling test procedure, as one type of stress relaxation methods, was originally developed to measure the in-plane residual stresses close to the specimen surfaces. The residual stresses are typically computed based on the relieved strains with the calibration coefficients. Inspired by the stress relaxation philosophy, an investigation on the thermal stress measurement of the CWR using the Hole-Drilling test procedure is conducted in this paper. First, the feasibility of using the Hole-Drilling method of the thermal stress measurement is examined via a 3-D finite element model. The stress relaxation computed from the Hole-Drilling test is compared with the applied uniaxial thermal stress. To facilitate the implementation on the CWR, a new set of calibration coefficients with finer depth increment is computed with a novel three-dimensional finite element model for more realistic simulation. The updated coefficients are experimentally validated with an aluminum column specimen under uniaxial load. For the experimental studies, a roadside prototype is developed and two sets of tests are carried out on free-to-expand rail tracks and on rails subjected to controlled thermal loads at UCSD Powell Laboratories. The relieved stresses are computed using the updated calibration coefficients, and a linear relationship between the axial and vertical residual stresses at the neutral axis is observed for both 136RE and 141RE rails. Furthermore, the in-situ thermal stresses are estimated with the residual stress compensation and the neutral temperatures are predicted according to linear thermal expansion theory. These tests illustrate that the determination of the thermal stresses by the Hole-Drilling method is in principle possible, once ways are developed to compensate for the residual stress relaxation. One such compensation is proposed in this paper. A statistical interpretation on the proposed method is also given to provide a reference for railroad applications.

Copyright © 2016 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In