Full Content is available to subscribers

Subscribe/Learn More  >

Determination of Impact Behavior of ABS From Acoustic Emission, Ultrasound and Optics

[+] Author Affiliations
Mehmet Akif Dundar, Emmanuel Ayorinde

Wayne State University, Detroit, MI

Mohammad Al-Zubi

Tafila Technical University, Tafila, Jordan

Paper No. IMECE2015-52948, pp. V009T12A002; 9 pages
  • ASME 2015 International Mechanical Engineering Congress and Exposition
  • Volume 9: Mechanics of Solids, Structures and Fluids
  • Houston, Texas, USA, November 13–19, 2015
  • Conference Sponsors: ASME
  • ISBN: 978-0-7918-5752-6
  • Copyright © 2015 by ASME


ABS (Acrylonitrile Butadiene Styrene) is an industrially-important and widely used amorphous thermoplastic on which billions of dollars are spent annually in USA. Its applications cover impact-mitigation, infrastructural and laboratory piping systems, sports goods, musical instruments, automotive trim components and bumper bars, medical devices, enclosures, protective headgear, marine craft, luggage, domestic appliances, toys, consumer goods, edgings for industrial goods, etc. Its use to contain impact damage is primary; hence continued research in this area is warranted.

The novelty and contribution of this work lies in its employment of more deeply insightful parameters and methods of characterization in acoustic emission and ultrasonics, as well as advanced optical microstructural characterization with sophisticated instrumentation, on one hand, and the wider correlations and conclusions now made possible by these means.

In the work which this paper reports, the impact response behavior of ABS material under various levels of impact energy was investigated using results obtained from the mechanical test, and parameters obtained from non-destructive test methods such as Acoustic Emission (AE), Ultrasonics, and Optical Inspection.

The ABS plates were impacted by a hemispherical steel projectile in a drop-weight impact tester. Two AE sensors were placed on the surfaces of ABS plates during the impact tests. After the impact tests were completed, ultrasonic C-Scan investigation of the damaged areas was also carried out, and sections were inspected under the microscope. Correlations between damage areas and various parameters of the non-destructive diagnostic test methods utilized were explored. ABS is one of the most highly impact-resistant materials utilized in industry. Its characterization under impact is therefore very important, in order to devise ways of enhancing properties that would make the material or structures made from it, better in service.

In this work, plate samples of rectangular shape were subjected to central impacts from a spherical impactor released from various heights. It is of interest to know how the impact propagates through the plate thickness, and how the microstructure is affected from point to point, both laterally and depth-wise. The issues of energy transfer and dissipation are significant in terms of the effectiveness of the material as an impact deadener.

Three non-destructive methods are utilized in this work for comprehensiveness and effectiveness. The AE approach is broadly divisible into two — classical, and transient. The former has dozens of descriptive parameters per each of the three dimensions, while the latter, which is based on the waveform and its several possible transforms, adds even many more possibilities. Thus, characterization in AE is particularly rich, and, when a sufficient number of appropriate parameters are utilized, has a very high probability of correctly depicting what is really going on in the material or structure under inspection. The ultrasonic scan reveals in color-code the variation of the material homogeneity throughout the scanned space, which, in each case, covered the whole plate. This normally provides a good picture of damage and its intensity variation in the test piece. The microstructure of selected parts of the test pieces before and after impact was inspected with a violet laser microscope. In this instrument, reflecting light from the white light source is detected with a color CCD camera. This camera obtains color information at the peak (focal point) detected with the laser light source on a pixel basis, thus enabling a real color examination, which SEMs cannot do. This instrument also uses a pin hole confocal optical system which enables high accuracy measurement and high definition examination by eliminating reflecting light from points other than the peak.

The results obtained showed clear relationships between energy and geometrical and material metrics of damage through the damage zone and shed more light on possible pathways to the desired enhancement of impact resistance in this case.

Copyright © 2015 by ASME



Interactive Graphics


Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In