0

Full Content is available to subscribers

Subscribe/Learn More  >

Resonant Response and Random Response Analysis of Mistuned Bladed Disk Consisting of Directionally Solidified Blade

[+] Author Affiliations
Yasutomo Kaneko

Ryukoku University, Ohtsu, Siga, Japan

Kazushi Mori

Mitsubishi Heavy Industries, Ltd., Takasago, Hyogo, Japan

Hiroharu Ooyama

Mitsubishi Hitachi Power Systems, Ltd., Takasago, Hyogo, Japan

Paper No. GT2015-42875, pp. V07BT32A017; 11 pages
doi:10.1115/GT2015-42875
From:
  • ASME Turbo Expo 2015: Turbine Technical Conference and Exposition
  • Volume 7B: Structures and Dynamics
  • Montreal, Quebec, Canada, June 15–19, 2015
  • Conference Sponsors: International Gas Turbine Institute
  • ISBN: 978-0-7918-5677-2
  • Copyright © 2015 by ASME

abstract

Recently, DS (Directionally Solidified) and SC (Single Crystal) alloys have been widely applied for gas turbine blades instead of CC (Conventional Casting) alloys, in order to improve the creep rupture strength. The DS blade consists of several columnar grains of SC, where the growing direction of the columnar crystal is set to the direction of the centrifugal force. Because the elastic constants of the DS blade are anisotropic, the mistuning characteristics of the bladed disk consisting of the DS blades seem to be different from those of the CC blade. In this study, the resonant response and random response analysis of mistuned bladed disks consisting of the DS blades are carried out, considering the deviations of the elastic constants and the crystal angle of the DS blade. The FMM (Fundamental Mistuning Model) and the conventional modal analysis method are used to analyze the vibration response of the mistuned bladed disk. The maximum resonant response and random response of the mistuned bladed disk consisting of the DS blades are estimated by the Monte Carlo simulation combining with the response surface method. These calculated results for the DS blades are compared with those of the CC blades. From these results, it is concluded that the maximum response of the mistuned bladed disk consisting of the DS blades is the nearly same as that of the CC blades. However, in the design of the tuned blade, where the blade resonance should be avoided, it is necessary to consider that the range of the resonant frequency of the DS blade becomes wider than that of the CC blade.

Copyright © 2015 by ASME
Topics: Resonance , Disks , Blades

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In