0

Full Content is available to subscribers

Subscribe/Learn More  >

Analysis of Instabilities in Railway Vehicles Employing Operational Modal Analysis

[+] Author Affiliations
Lara Erviti Calvo, Gorka Agirre Castellanos

CETEST, Test and Analysis Centre, Beasain, Spain

Germán Gimenez

Universidad de Navarra, San Sebastian, Spain

Paper No. JRC2015-5697, pp. V001T10A005; 7 pages
doi:10.1115/JRC2015-5697
From:
  • 2015 Joint Rail Conference
  • 2015 Joint Rail Conference
  • San Jose, California, USA, March 23–26, 2015
  • Conference Sponsors: Rail Transportation Division
  • ISBN: 978-0-7918-5645-1
  • Copyright © 2015 by ASME

abstract

The application of Operational Modal Analysis (OMA) in the railway sector opens a broad field of opportunities. The validation of the numerical model employed in the design phase is usually performed employing data obtained in static tests. The drawback is that some suspension parameters, such as dampers, only have an influence in the dynamic behavior and not in the static behavior. Because of that, the use of the mode shapes identified from track measurements in combination with the static tests leads to a more accurate validation of the numerical model. Apart from that, most passenger comfort and dynamic problems are associated to slightly damped modes. A correct identification of the modal parameters can be used as a continuous design improvement tool to improve the comfort and dynamic characteristics of future designs.

Another valuable application of OMA techniques is the identification of the mode shapes corresponding to instabilities, due to the safety impact that they have. In railway vehicles, instabilities are associated to mode shapes that present a damping rate which decreases with the increase of the running speed. Above a certain speed value, the excitation coming from track cannot be damped by the vehicle and it reaches an unstable condition. This unstable condition leads to high acceleration levels experienced by the passengers and high interaction forces between the wheel and the rail that may lead to safety hazards. The speed above which the vehicle is unstable is known as critical speed, and has to be greater than the maximum speed of the vehicle with a reasonable safety margin.

The use of OMA techniques allows identifying the mode shape that causes the instability. This paper presents the application of OMA techniques to measurements performed on a passenger vehicle, in which the speed was increased until the vehicle was unstable. The mode shape that caused the instability was identified as well as its corresponding natural frequency and damping rate.

Copyright © 2015 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In