0

Combustor Exit Temperature Distortion Effects on Heat Transfer and Aerodynamics Within a Rotating Turbine Blade Passage PUBLIC ACCESS

[+] Author Affiliations
S. P. Harasgama

Royal Aerospace Establishment, Pyestock, Farnborough, Hampshire, UK

Paper No. 90-GT-174, pp. V004T09A026; 8 pages
doi:10.1115/90-GT-174
From:
  • ASME 1990 International Gas Turbine and Aeroengine Congress and Exposition
  • Volume 4: Heat Transfer; Electric Power; Industrial and Cogeneration
  • Brussels, Belgium, June 11–14, 1990
  • Conference Sponsors: International Gas Turbine Institute
  • ISBN: 978-0-7918-7907-8
  • Copyright © 1990 by ASME

abstract

A numerical simulation of temperature distortion at inlet to a rotating turbine rotor has been performed. A 3D Navier-Stokes code the 2D boundary layer code - STAN5, have been used.

The results show that the hot gas is transported to the pressure surface of the blade and that hot gas also migrates to the blade pressure side tip. At locations greater than 50–60% axial chord the hot gas enters the tip-gap and emerges over the suction side. These computations are in agreement with previous experimental results.

The secondary flows within the turbine rotor are enhanced by the introduction of inlet radial temperature distortion and this is in accord with previous analytical work. It is shown that the heat flux near the tip region on the pressure side of the blade can be increased by up to 76% due to the re-distribution of the inlet temperature distortion.

Copyright © 1990 by ASME
This article is only available in the PDF format.

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In