0

Two Stage Slagging Combustor Design for a Coal-Fueled Industrial Gas Turbine FREE

[+] Author Affiliations
L. H. Cowell, R. T. LeCren, C. E. Tenbrook

Solar Turbines Incorporated, San Diego, CA

Paper No. 91-GT-212, pp. V003T05A006; 9 pages
doi:10.1115/91-GT-212
From:
  • ASME 1991 International Gas Turbine and Aeroengine Congress and Exposition
  • Volume 3: Coal, Biomass and Alternative Fuels; Combustion and Fuels; Oil and Gas Applications; Cycle Innovations
  • Orlando, Florida, USA, June 3–6, 1991
  • Conference Sponsors: International Gas Turbine Institute
  • ISBN: 978-0-7918-7900-9
  • Copyright © 1991 by ASME

abstract

A full size combustor for a coal-fueled industrial gas turbine engine has been designed and fabricated. The design is based on extensive work completed through one-tenth scale combustion tests. Testing of the combustion hardware will be completed with a high pressure air supply in a combustion test facility before the components are integrated with the gas turbine engine. The combustor is a two-staged, rich-lean design. Fuel and air are introduced in the primary combustion zone where the combustion process is initiated. The primary zone operates in a slagging mode inertially removing coal ash from the gas stream. Four injectors designed for coal-water mixture (CWM) atomization are used to introduce the fuel and primary air. In the secondary combustion zone additional air is injected to complete the combustion process at fuel lean conditions. The secondary zone also serves to reduce the gas temperatures exiting the combustor. Between the primary and secondary zones is a Particulate Rejection Impact Separator (PRIS). In this device much of the coal ash that passes from the primary zone is inertially separated from the gas stream. The two-staged combustor along with the PRIS have been designated as the combustor island. All of the combustor island components are refractory lined to minimize heat loss. Fabrication of the combustor has been completed. The PRIS is still under construction. The combustor hardware is being installed at the Caterpillar Technical Center for high pressure test evaluation. The design, test installation, and test plan of the full size combustor island are discussed.

Copyright © 1991 by ASME
This article is only available in the PDF format.

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In