0

The Creep Damage Behavior of the Plasma-Sprayed Thermal Barrier Coating System NiCr22Co12Mo9-NiCoCrAlY-ZrO2/7%Y2O3 FREE

[+] Author Affiliations
Uli T. Schmidt, Otmar Vöhringer, Detlef Löhe

University of Karlsruhe (TH), Karlsruhe, Germany

Paper No. 98-GT-387, pp. V005T14A030; 6 pages
doi:10.1115/98-GT-387
From:
  • ASME 1998 International Gas Turbine and Aeroengine Congress and Exhibition
  • Volume 5: Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education
  • Stockholm, Sweden, June 2–5, 1998
  • Conference Sponsors: International Gas Turbine Institute
  • ISBN: 978-0-7918-7866-8
  • Copyright © 1998 by ASME

abstract

During creep loading metallic substrates impose deformation on deposited ceramic thermal barrier coatings (TBC). Strain accomodation of the TBC is not attained by plastic deformation, but by means of crack initiation, crack opening, crack propagation or sliding of adjacent crack faces. In technical applications a distinction is made between tolerated or desired cracks perpendicular to the surface, and detrimental cracks parallel to the substrate-coating interface. Thus, TBC can respond to creep deformation by segmentation or spallation, the latter being referred to as failure.

The parameters influencing the probability of either segmentation or spallation are temperature, creep rate, magnitude of creep deformation, layer thickness and microstructure of the TBC. It can be stated that spallation failure probability increases with increasing creep rate, creep deformation and layer thickness. The presence of pores between single spraying layers also strongly augments the likelyhood of spallation. No significant influence of temperature on spallation failure probability can be found in the range from 850°C to 1050°C.

Light microscopy and scanning electron microscopy investigations show that the microstructure of the ceramic TBC changes during creep, and that the density of cracks detected on micrographs with low magnification (x50), increases with increasing creep deformation. On the other hand, the density of microcracks visible with high magnification (x500) is constant, or even decreases with increasing creep deformation. These findings are explained by sintering processes enabled by stress relaxation due to formation of macroscopic cracks perpendicular to the surface as a response to creep deformation.

A relationship between microstructural changes and the emission of acoustic signals recorded during creep is presented.

Copyright © 1998 by ASME
This article is only available in the PDF format.

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In