0

Secondary Flow Decay Downstream of Turbine Inlet Guide Vane With End-Wall Contouring PUBLIC ACCESS

[+] Author Affiliations
V. Michelassi, F. Martelli

University of Florence, Florence, Italy

U. Corradini

GE-Nuovo Pignone S.p.A., Florence, Italy

Paper No. 98-GT-095, pp. V001T01A031; 10 pages
doi:10.1115/98-GT-095
From:
  • ASME 1998 International Gas Turbine and Aeroengine Congress and Exhibition
  • Volume 1: Turbomachinery
  • Stockholm, Sweden, June 2–5, 1998
  • Conference Sponsors: International Gas Turbine Institute
  • ISBN: 978-0-7918-7862-0
  • Copyright © 1998 by ASME

abstract

The secondary flows development downstream of a turbine stator blade with non-symmetric endwall contours is measured and analyzed. Measurements are carried out in a subsonic linear cascade with a large test section. The measurements are carried out using micro-pneumatic five hole probes which allow a detailed description of the vortical structures. The effect of secondary flows on the blade load is discussed. The passage vortices are found to collide and produce two pairs of counter-rotating vortices. The collision is caused by the mutual influence of the endwall contours and the pressure distribution on the blade. The measurements in 13 planes downstream of the trailing edge also show the presence of an extra vortex which appears because of sudden channel expansion. The 13 measurement planes orthogonal to the mean flow allow a detailed description of the secondary flow decay. The large flow distortion in terms of pitch and yaw angles is analyzed and discussed.

Copyright © 1998 by ASME
This article is only available in the PDF format.

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In