0

Full Content is available to subscribers

Subscribe/Learn More  >

Modelling Chemical and Microstructural Evolution Across Dissimilar Interfaces in Power Plants

[+] Author Affiliations
J. W. G. Clark, D. G. McCartney, H. Saghafifar, P. H. Shipway

University of Nottingham, Nottingham, UK

Paper No. POWER2014-32242, pp. V001T07A004; 10 pages
doi:10.1115/POWER2014-32242
From:
  • ASME 2014 Power Conference
  • Volume 1: Fuels and Combustion, Material Handling, Emissions; Steam Generators; Heat Exchangers and Cooling Systems; Turbines, Generators and Auxiliaries; Plant Operations and Maintenance; Reliability, Availability and Maintainability (RAM); Plant Systems, Structures, Components and Materials Issues
  • Baltimore, Maryland, USA, July 28–31, 2014
  • Conference Sponsors: Power Division
  • ISBN: 978-0-7918-4608-7
  • Copyright © 2014 by ASME

abstract

Dissimilar metal welds between different grades of ferritic steels or between ferritic steel and austenitic nickel alloys are used extensively in power plants. When such weldments are exposed to high temperature conditions, as might be found in service in a thermal power plant, local microstructural evolution will occur. This is due to diffusion, driven by chemical potential gradients, of solute atoms. Such diffusion can cause major changes in hardness and mechanical properties of joints and can lead to the formation of embrittling phases and/or softened zones. This can potentially lead to premature component failure by, for example, high temperature creep.

Whilst finite element modelling of mechanical behavior and damage evolution is well established this is not the case for chemical diffusion and microstructural evolution at weld interfaces. In the present study, the general purpose linked thermodynamic and kinetic software packages Thermo-Calc and DICTRA have been applied to simulate chemical diffusion and precipitation/dissolution (i.e. phase fraction evolution) in dissimilar weld joints using commercially available thermodynamic databases TCFE7 and TTNI6. Two approaches for modelling multiphase, multicomponent systems using this software will be presented and discussed and their implementation will be illustrated.

The paper will present results on modelling a range of dissimilar metal interfaces of both the ferritic-ferritic type and the ferritic-austenitic type (for example, grade 22 to grade 91 steel and grade 22 to Inconel 625). Ferritic-ferritic case studies will compare model predictions with a number of previously published experimental studies and it will be shown that the current approach can give good quantitative agreement in terms of carbon composition profiles and carbide depleted/carbide enriched zones. The results obtained from modelling a grade 22 steel-Inconel 625 system where the crystal structure of the matrix is different on either side of the weld will be compared with experimental observations on a weld overlaid tube component. The experimental results will include scanning and transmission electron microscopy studies of the weld interface regions and it will be shown that the predictions of diffusion and precipitate formation compare well with observations made experimentally following exposure at 650 °C. Also discussed are the options for further refining the computational model based on empirically observed phenomena, such as the unmixed zone of a weld.

Copyright © 2014 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In