0

Full Content is available to subscribers

Subscribe/Learn More  >

Wellhead Fatigue, Effect of Uncertainty in Directional Variation and Environmental Conditions for Operations of Short Duration

[+] Author Affiliations
Torfinn Hørte, Marcus Hofstad

DNV GL, Høvik, Norway

Guttorm Grytøyr

Statoil ASA, Oslo, Norway

Massimiliano Russo

Statoil ASA, Houston, TX

Lorents Reinås

Statoil ASA, Stavanger, Norway

Paper No. OMAE2014-24482, pp. V01BT01A040; 13 pages
doi:10.1115/OMAE2014-24482
From:
  • ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering
  • Volume 1B: Offshore Technology
  • San Francisco, California, USA, June 8–13, 2014
  • Conference Sponsors: Ocean, Offshore and Arctic Engineering Division
  • ISBN: 978-0-7918-4538-7
  • Copyright © 2014 by ASME

abstract

Fatigue of subsea wellhead systems due to wave-induced loads from riser and rig motions has been subjected to increased attention in recent years. Major accidents due to fatigue failure has not been experienced up to now, but with increasing size of drilling rigs and BOPs in combination with longer drilling campaigns on wells, proper documentation of adequate fatigue capacity for a planned operation is becoming increasingly important. Achieving this has turned out to be a challenging issue for some wells, where application of existing fatigue analyses methodology provides rather short fatigue lives. It is expected that such calculated fatigue life results are somewhat conservative due to conservatism in the assumptions commonly applied as both input parameters and methodology are associated with some uncertainty. However, it is difficult to quantify the degree of conservatism in such analytical results. One area of conservatism relates to wellhead fatigue analyses typically being performed under the assumption that the environmental actions and response is unidirectional (in one plane only) while assuming the most unfavorable direction. This is clearly not the case in real life, and one would like to take some benefit of distributing the loading more accurately around the circumference of the pipe section. For offshore structures subjected to continuous loading over many years, one may use directional scatter diagrams for wave height and wave period based on average over years of data. However, for wellhead fatigue, the duration of a drilling or well intervention operation may be relatively short, perhaps weeks or a few months, and it is more likely that there one prevailing environmental direction may dominate such short term exposures. The environmental conditions will vary from one year to another, i.e. the environmental conditions in one particular year may be less or more severe than the average represented by the scatter diagram. Both these variation effects are studied in the present paper by doing fatigue analysis for different durations; 3 days, 10 days, 1 month, 3 months, 6 months and one year. The same period is taken from each of the 56 years of environmental data, and individual results for that period within each year are calculated. Statistics quantifying the directional effects is determined. The directional effect is here defined as the ratio of the fatigue life where the directional information is taken into consideration and the fatigue life using an omnidirectional scatter diagram considering one direction only. Directional effect with reference to both head sea and beam sea are considered. Similarly, statistics of the fatigue life variation between years are obtained. Statistics are estimated separately for the six different durations. Finally, the statistics derived are applied in a structural reliability analysis (SRA). The SRA results are then used to propose reasonable factors that can be applied in conventional wellhead fatigue analysis to account for directional effects and for variation in environmental conditions from one year to another, depending on duration of the planned operation.

Copyright © 2014 by ASME
Topics: Fatigue , Uncertainty

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In