Full Content is available to subscribers

Subscribe/Learn More  >

Higher Order Finite Element Meshes for Centrifugal Impeller Blade Analyses Using Pointwise

[+] Author Affiliations
Mikhail Grigoriev, James Hitt

Cameron, Compression Systems, Buffalo, NY

Travis Carrigan, David Garlisch

Pointwise Inc., Fort Worth, TX

Paper No. GT2014-25734, pp. V07AT28A007; 12 pages
  • ASME Turbo Expo 2014: Turbine Technical Conference and Exposition
  • Volume 7A: Structures and Dynamics
  • Düsseldorf, Germany, June 16–20, 2014
  • Conference Sponsors: International Gas Turbine Institute
  • ISBN: 978-0-7918-4576-9
  • Copyright © 2014 by ASME


Finite Element Methods (FEM) have become a key tool to predict stresses, deformations, eigenfrequencies and eigenmodes in centrifugal impellers under centrifugal loads. Accurate prediction of values of principal stresses and natural frequencies is critical to avoiding field failures of impellers. Accurate prediction of maximum principal stresses in centrifugal impeller blades is a straightforward task using linear finite elements with a moderate mesh resolution. Centrifugal impeller failures due to high stresses have been virtually eliminated as a failure mode because of this level of analysis. However, the same level of analysis of natural frequencies does not always result in accurate predictions of higher frequency modes. It has been Cameron’s experience that the most common reason for impeller field failure has been a high frequency resonance resulting in a high cycle fatigue failure.

Although there are a few commercially available tools for stress and modal analyses of centrifugal impellers, we are not aware of any that offers the flexibility, generality and, most importantly, accuracy in predicting high modal frequencies. The impeller designer has to find a solution that allows the impeller to survive with the exciters caused by diffuser vane pass frequencies and/or inlet guide vane pass frequencies and still meet the performance guarantee. Historically, design practice focused on stress levels and avoiding one time vane pass frequencies. In general, this approach has been very successful at eliminating stress and one-time vane pass frequency failures. However, it must be emphasized that current tools can incorrectly predict excitation modes due to twice the diffuser vane or inlet guide vane pass frequencies. It has been Cameron’s experience that most field failures are in this two times vane pass frequency range.

The development of a custom in-house tool for accurate stress and modal analyses of centrifugal impellers has been a major task at Cameron in the past few years. This thrust resulted in Cameron’s cooperation with Pointwise, Inc. to develop a set of automated tools to utilize higher order finite element meshes for such analyses. Pointwise has established itself as the world-leading mesh generation software for Computational Fluid Dynamics (CFD) analysis. However, the flexibility and versatility of this meshing software also makes it a very attractive and powerful tool for generating Finite Element Analysis (FEA) meshes.

This work focuses on a utilization of Pointwise for automated generation of higher order finite element meshes for centrifugal impeller blades. Pointwise-based automated tools generate a fully structured mesh of higher order elements that involves every detailed feature of the centrifugal impeller. The mesh retains geometric validity of the centrifugal impeller and maintains accurate geometrical resolution of the higher order surfaces associated with the impeller blade and hub. The structural and modal analyses are then automatically performed in ANSYS. We show that the Pointwise-based meshing tools are both general and robust. They allow for high quality, higher order finite element meshes for an entire range of applications that we encounter at Cameron Compression Systems on a daily basis.

This work demonstrates the attractiveness of higher order finite element meshes for accurately predicting the natural frequencies for centrifugal impellers for an entire range of desired frequencies. We present finite element mesh convergence studies, and utilize a Pointwise based meshing tool together with ANSYS to accurately predict failure modes for impellers that have experienced field failures in the last decade.

Copyright © 2014 by ASME



Interactive Graphics


Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In