0

Full Content is available to subscribers

Subscribe/Learn More  >

Turbine Nozzle Endwall Film Cooling Study Using Pressure Sensitive Paint

[+] Author Affiliations
Luzeng J. Zhang, Ruchira Sharma Jaiswal

Solar Turbines, Inc.

Paper No. 2001-GT-0147, pp. V003T01A030; 10 pages
doi:10.1115/2001-GT-0147
From:
  • ASME Turbo Expo 2001: Power for Land, Sea, and Air
  • Volume 3: Heat Transfer; Electric Power; Industrial and Cogeneration
  • New Orleans, Louisiana, USA, June 4–7, 2001
  • Conference Sponsors: International Gas Turbine Institute
  • ISBN: 978-0-7918-7852-1
  • Copyright © 2001 by ASME

abstract

Endwall surface film cooling effectiveness was measured on a turbine vane endwall surface using the pressure sensitive paint (PSP) technique. A double staggered row of holes and a single row of discrete slots were used to supply film cooling in front of the nozzle cascade leading edges. Nitrogen gas was used to simulate film cooling flow as well as a tracer gas to indicate oxygen concentration such that film effectiveness by the mass transfer analogy could be obtained. Cooling mass flow was controlled to be 0.5 to 3.0% of the mainstream mass flow. The freestream Reynolds number was about 283000 and Mach number was about 0.11. The freestream turbulence intensity was kept at 6.0% for all the tests, measured by a thermal anemometer. The PSP was calibrated at various temperatures and pressures to obtain better accuracy before being applied to the endwall surface. Film effectiveness distributions were measured on a flat endwall surface for five different mass flow rates. The film effectiveness increased nonlinearly with mass flow rate, indicating a strong interference between the cooling jets and the endwall secondary flows. At lower mass flow ratios, the secondary flow dominated the near wall flow field, resulting in a low film effectiveness. At higher mass flow ratios, the cooling jet momentum dominated the near wall flow field, resulting in a higher film effectiveness. The comparison between hole injection and slot injection was also made.

Copyright © 2001 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In