0

Full Content is available to subscribers

Subscribe/Learn More  >

Investigation of Characteristic-Temperature Approaches for Heat-Transfer Correlations at Supercritical Conditions

[+] Author Affiliations
Sarah Mokry, Igor Pioro

University of Ontario Institute of Technology, Oshawa, ON, Canada

Paper No. ICONE21-16765, pp. V006T16A054; 11 pages
doi:10.1115/ICONE21-16765
From:
  • 2013 21st International Conference on Nuclear Engineering
  • Volume 6: Beyond Design Basis Events; Student Paper Competition
  • Chengdu, China, July 29–August 2, 2013
  • Conference Sponsors: Nuclear Engineering Division
  • ISBN: 978-0-7918-5583-6
  • Copyright © 2013 by ASME

abstract

It is expected that the next generation of water-cooled nuclear reactors will operate at supercritical pressures (∼25 MPa) and high coolant temperatures (350–625°C). In support of the development of SuperCritical Water-cooled Reactors (SCWRs), research is currently being conducted for heat-transfer at supercritical conditions. Currently, there are no experimental datasets for heat transfer from power reactor fuel bundles to the fuel coolant (water) available in open literature. Therefore, for preliminary calculations, heat-transfer correlations obtained with bare-tube data can be used as a conservative approach.

A number of empirical generalized correlations, based on experimentally obtained datasets, have been proposed to calculate Heat Transfer Coefficients (HTCs) in forced convective heat transfer for various fluids, including water, at supercritical pressures. These bare-tube-based correlations are available in various literature sources. There have been a number of methods applied to correlate heat transfer data. The most conventional approach, which accounts for property variations in the data, is to modify the classical Dittus-Boelter equation for forced convection. However, analysis and comparison of these correlations has shown that differences in HTC values can be up to several hundred percent.

In general, the familiar correlations of Dittus-Boelter and Bishop et al. have used the bulk-fluid temperature approach for characteristic temperature properties evaluations. However, at high heat fluxes, fluid near the tube-wall will have a temperature close to that of the wall temperature. This might be significantly different from the bulk-fluid temperature. Therefore, another approach can be used based on the wall temperature as the characteristic temperature. The Swenson et al. correlation is based upon this approach. Finally, a third approach has been considered in which the film-temperature is used as the characteristic temperature (Tf = (Tw+Tb) / 2). McAdams et al. based their correlation for annuli on this approach.

Therefore, the objective of this paper is to evaluate the three characteristic temperature approaches, (1) Bulk-fluid temperature approach; (2) Wall-temperature approach; and (3) Film-temperature approach, and determine which characteristic temperature method can most accurately predict supercritical water heat transfer coefficients. Both classical correlations and more recently developed correlations are considered in this investigation.

Copyright © 2013 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In