0

Full Content is available to subscribers

Subscribe/Learn More  >

The Study of Cavitation Characteristics of a Heavy Liquid-Metal Coolant

[+] Author Affiliations
P. A. Bokov, A. V. Beznosov, A. V. Lvov, M. V. Iarmonov, T. A. Bokova

Nizhny Novgorod State Technical University by R. E. Alekseev, Nizhny Novgorod, Russia

Paper No. ICONE21-15263, pp. V006T16A008; 11 pages
doi:10.1115/ICONE21-15263
From:
  • 2013 21st International Conference on Nuclear Engineering
  • Volume 6: Beyond Design Basis Events; Student Paper Competition
  • Chengdu, China, July 29–August 2, 2013
  • Conference Sponsors: Nuclear Engineering Division
  • ISBN: 978-0-7918-5583-6
  • Copyright © 2013 by ASME

abstract

Adequate design solution and maintenance of circuits with fast reactors cooled by lead and lead-bismuth coolants require taking into account the peculiarities of hydrodynamics of these coolant flows. The design pressure of saturated vapors of lead and its alloys at temperatures of 400–550 °C is 10 −18−10 −10 atm, which is significantly less than that of sodium or water. Processes of traditional cavitation cannot occur in a flow of heavy liquid-metal coolants because of their specific character. The main circulation pumps of reactor circuits are one of their basic elements. In fact, the flow-type parts of these pumps and other vane pumps operating in lead and its alloys cannot be calculated by traditional methods in terms of cavitation characteristics; appropriate calculation formulas are not currently available. To study cavitation processes in a heavy liquid-metal coolant flow, the authors have carried out the experiments aimed at:

- determining the conditions of disconnection of liquid lead and lead-bismuth eutectic column;

- determining the cavitation characteristics of a centrifugal pump transferring lead at a temperature of 500 °C;

- studying the characteristics of ejector (Venturi nozzle) in a liquid metal;

- studying the cavitation erosion effect of the lead coolant on impeller vanes of an axial-flow pump in a limited volume in the FT-4-A stand at a lead flow rate of up to 1200 t/h;

- studying the cavitation characteristics of an axial-flow pump in the FT-4 stand at shaft speeds of 13.34–25 Hz.

These studies are performed with the lead coolant at temperatures of 450°−550°C, oxygen in lead from 10−4−10−5 to 100, flow rates from 20 to 1800 t/h, which corresponds to velocities of the lead coolant flow from 1.0 to 26 m/s.

The experiments have shown that as distinct from water, traditional cavitation processes in a heavy liquid-metal coolant (HLMC) flow are not recorded. The probable cavitation mechanism is gas cavitation. The allowance for the specific character of hydrodynamics of HLMC flows is necessary for adequate design engineering and maintenance of some elements of the reactor circuit.

Copyright © 2013 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In