0

Full Content is available to subscribers

Subscribe/Learn More  >

Map of Passive Turbulence Control to Flow-Induced Motions for a Circular Cylinder at 30,000<Re<120,000: Sensitivity to Zone Covering

[+] Author Affiliations
Hongrae Park, Michael M. Bernitsas, Che-Chun Chang

The University of Michigan, Ann Arbor, MI

Paper No. OMAE2013-10123, pp. V007T08A003; 10 pages
doi:10.1115/OMAE2013-10123
From:
  • ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering
  • Volume 7: CFD and VIV
  • Nantes, France, June 9–14, 2013
  • Conference Sponsors: Ocean, Offshore and Arctic Engineering Division
  • ISBN: 978-0-7918-5541-6
  • Copyright © 2013 by ASME

abstract

Passive turbulence control (PTC) in the form of two straight roughness strips with variable width, and thickness about equal to the boundary layer thickness, is used to modify the flow-induced motions (FIM) of a rigid circular cylinder. The cylinder is supported by two end-springs and the flow is in the TrSL3, high-lift, regime. The PTC-to-FIM Map, developed in previous work, revealed zones of weak suppression, strong suppression, hard galloping, and soft galloping. In this paper the sensitivity of the PTC-to-FIM Map to: (a) the width of PTC covering, (b) PTC covering a single or multiple zones, (c) PTC being straight or staggered is studied experimentally. Experiments are conducted in the Low Turbulence Free Surface Water Channel of the University of Michigan. Fixed parameters are: cylinder diameter D = 8.89cm, m* = 1.725, spring stiffness K = 763N/m, aspect ratio l/D = 10.29, and damping ratio ζ = 0.019. Variable parameters are: circumferential PTC location αPTC ∈ [0°−180°], Reynolds number Re ∈ [30,000–120,000], flow velocity U ∈ [0.36m/s–1.45m/s]. Measured quantities are: amplitude ratio A/D, frequency ratio fosc/fn,w, and synchronization range. As long as the roughness distribution is limited to remain within a zone, the width of the strips does not affect the FIM response. When multiple zones are covered, the strong suppression zone dominates the FIM.

Copyright © 2013 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In