0

Full Content is available to subscribers

Subscribe/Learn More  >

The Effect of Surface Roughness on Efficiency of Low Pressure Turbines

[+] Author Affiliations
Raúl Vázquez

ITP Industria de Turbo Propulsores S.A., Madrid, SpainUPM Universidad Politécnica Madrid, Madrid, Spain

Diego Torre

ITP Industria de Turbo Propulsores S.A., Madrid, Spain

Paper No. GT2013-94200, pp. V06AT36A007; 9 pages
doi:10.1115/GT2013-94200
From:
  • ASME Turbo Expo 2013: Turbine Technical Conference and Exposition
  • Volume 6A: Turbomachinery
  • San Antonio, Texas, USA, June 3–7, 2013
  • Conference Sponsors: International Gas Turbine Institute
  • ISBN: 978-0-7918-5522-5
  • Copyright © 2013 by ASME

abstract

The effect of surface roughness on efficiency of low pressure turbines (LPT) was investigated experimentally in a multistage turbine high-speed rig. The rig consisted of three stages of a state-of-the-art LPT. The stages were characterized by a very high wall-slope angle, reverse cut-off design, very high lift and very high aspect ratio airfoils.

Two sets of airfoils (both stators and rotors) were tested. The first set was made of airfoils with a roughness size of 0.7 μm Ra (25–35×10−5 ks/Cm), which was representative of LPT polished airfoils. The surface finish for the second set of airfoils was 1.8 μm Ra for blades and 2.5 μm Ra for stators (approximately 90×10−5 in terms of ks/Cm for both stators and blades). The resulting roughness of this set was representative of “as-cast” airfoils of low pressure turbines.

The airfoil geometries, velocity triangles, leading and trailing edge locations and flowpath were maintained between both sets. They were tested with the same instrumentation and at the same operating conditions with the intention of determining the isolated impact of the surface roughness on the overall efficiency. The turbine characteristics: sensitivity to speed, specific work, Reynolds number and purge flows were obtained for both sets.

The comparison of the results suggests that the efficiency and capacity of both types of airfoils exhibit the same behaviour. No significant differences in the results can be distinguished for the range of operating conditions of this study.

The results agree with previous studies of distributed roughness in turbines: the use of as-cast rough airfoils in some low pressure turbines at high altitude does not introduce additional pressure losses.

Copyright © 2013 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In