0

Full Content is available to subscribers

Subscribe/Learn More  >

Interaction Between Swirl Number Fluctuations and Vortex Shedding in a Single-Nozzle, Turbulent, Swirling, Fully-Premixed Combustor

[+] Author Affiliations
Nicholas A. Bunce, Bryan D. Quay, Domenic A. Santavicca

The Pennsylvania State University, University Park, PA

Paper No. GT2013-95812, pp. V01BT04A060; 13 pages
doi:10.1115/GT2013-95812
From:
  • ASME Turbo Expo 2013: Turbine Technical Conference and Exposition
  • Volume 1B: Combustion, Fuels and Emissions
  • San Antonio, Texas, USA, June 3–7, 2013
  • Conference Sponsors: International Gas Turbine Institute
  • ISBN: 978-0-7918-5511-9
  • Copyright © 2013 by ASME

abstract

Flame response to imposed velocity fluctuations is experimentally measured in a single-nozzle, turbulent, swirling, fully-premixed combustor. The flame transfer function is used to quantify the flame’s response to imposed velocity fluctuations. Both the gain and phase of the flame transfer function are qualitatively similar for all operating conditions tested. Flame transfer function gain exhibits alternating regions of decreasing gain with increasing forcing frequency followed by regions of increasing gain with increasing forcing frequency. This alternating behavior gives rise to gain extrema. Flame transfer function phase magnitude increases quasi-linearly with increasing forcing frequency. Deviations from the linear behavior occur in the form of inflection points. Within the field, the current understanding is that the flame transfer function gain extrema are caused by the constructive/destructive interference of swirl number fluctuations and vortex shedding. Phase-synchronized images of forced flames are acquired to investigate the presence/importance of swirl number fluctuations, which manifest as fluctuations in mean flame position, and vortex shedding in this combustor. Analysis of phase-synchronized flame images reveals that mean flame position fluctuations are present at forcing frequencies corresponding to flame transfer function gain minima but not at forcing frequencies corresponding to flame transfer function gain maxima. This observation contradicts the understanding that flame transfer function gain maxima are caused by the constructive interference of mean flame position fluctuations and vortex shedding since mean flame position fluctuations are shown not to exist at flame transfer function gain maxima. Further analysis of phase-synchronized flame images shows that the variation of mean flame position fluctuation magnitude with forcing frequency follows an inverse trend to the variation of flame transfer function gain with forcing frequency, i.e. when mean flame position fluctuation magnitude increases flame transfer function gain decreases and vice versa. Based on these observations it is concluded that mean flame position fluctuations are a subtractive effect. The physical mechanism through which mean flame position fluctuations decrease flame response is through the interaction of the flame with the Kelvin-Helmholtz instability of the mixing layer in the combustor. When mean flame position fluctuations are large the flame moves closer to the mixing layer and damps the Kelvin-Helmholtz instability due to the increased kinematic viscosity, fluid dilatation, and baroclinic production of vorticity with opposite sign associated with the high temperature reaction zone.

Copyright © 2013 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In