0

Full Content is available to subscribers

Subscribe/Learn More  >

Development of a Test Methodology and a Design Tool to Predict the Wear Rate of Flexible Risers Outer Sheaths Installed in I-Tubes

[+] Author Affiliations
Fabio Pires, Victor Nogueira, Fabio Aquino, Judimar Clevelario, Thyago Takey

Wellstream Flexibles, Rio de Janeiro, RJ, Brazil

Terry Sheldrake

Wellstream Flexibles, Newcastle, United Kingdom

Paper No. OMAE2012-83874, pp. 733-739; 7 pages
doi:10.1115/OMAE2012-83874
From:
  • ASME 2012 31st International Conference on Ocean, Offshore and Arctic Engineering
  • Volume 3: Pipeline and Riser Technology
  • Rio de Janeiro, Brazil, July 1–6, 2012
  • Conference Sponsors: Ocean, Offshore and Arctic Engineering Division
  • ISBN: 978-0-7918-4490-8
  • Copyright © 2012 by ASME

abstract

The interface between the flexible risers and I tubes installed in floating production units is being considered by the industry as a critical region regarding wearing due to its geometric characteristics and high contact loads between the flexible risers and I-tube interface equipment. During the past few years some instances of outer sheath damage were reported by the offshore industry.

Such occurrences have been responsible for the unplanned maintenance of flexible pipes and production loss. Based on this scenario, Wellstream has developed and incorporated into its regular supplies, a new model of riser interface equipment with a replaceable polymeric liner, which has been qualified through a full-scale test program and demonstrated to be adequate in protecting the flexible pipe’s outer sheaths [1].

Although the developed equipment was originally designed to allow the replacement of the polymeric liner, which acts as a sacrificial part, the planning of periodic inspections and the determination of the optimum liner thickness could not be reliably performed due to the lack of solid experimental data regarding the wear rates of the polymer pairs and the contact pressures expected for that region. As part of an internal research program, a FEA model has been developed and calibrated in order to allow the assessment of the contact pressure between the flexible pipe’s outer sheath and the I-tube interface equipment for the actual contact pressures generated by the field fatigue loads, supporting the development of a midscale test program to determine the wear rates of the polymeric materials pairs as a function of the contact pressure [2].

The determination of these two main variables allowed the definition and conception of a dedicated design tool and the generation of experimental data to the flexible riser interface equipment and its polymeric liner, increasing the reliability of the flexible risers installed in I-tubes.

This paper presents a discussion regarding the contact pressures experienced by the flexible pipe sample in service, the basis for the experimental test program and the concept of the developed design tool.

Copyright © 2012 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In